Hydrogen absorption-desorption properties and crystal structure analysis of Ti-Cr-Mo alloys

K. Iwase, Y. Nakamura, K. Mori, S. Harjo, T. Ishigaki, T. Kamiyama, E. Akiba

研究成果: Contribution to journalArticle

13 引用 (Scopus)

抜粋

We investigated that heat treatment condition, hydrogen absorption-desorption properties and crystal structure of Ti-(55-x)Cr-x Mo alloys by the use of X-ray diffraction (XRD) and PCT measurement. We found that the quenching treatment was effective to synthesize bcc single phase alloys in comparison with annealing treatment. The lattice parameter, a, of bcc phase in the quenched alloys showed linear relationship with increasing the Mo content. The as-cast alloys had a sloping plateau, while the quenched alloys had a flat plateau. The alloys showed the equilibrium pressure increased with increasing the Mo content. The hydrogen reversible capacity of the alloys reached 1.33-1.39-H/M (2.34-2.68 mass%) under hydrogen pressure 8.0 MPa at 313 K.

元の言語英語
ページ(範囲)99-102
ページ数4
ジャーナルJournal of Alloys and Compounds
404-406
発行部数SPEC. ISS.
DOI
出版物ステータス出版済み - 12 8 2005

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

フィンガープリント Hydrogen absorption-desorption properties and crystal structure analysis of Ti-Cr-Mo alloys' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Iwase, K., Nakamura, Y., Mori, K., Harjo, S., Ishigaki, T., Kamiyama, T., & Akiba, E. (2005). Hydrogen absorption-desorption properties and crystal structure analysis of Ti-Cr-Mo alloys. Journal of Alloys and Compounds, 404-406(SPEC. ISS.), 99-102. https://doi.org/10.1016/j.jallcom.2005.05.010