Immobilization mechanism of Se oxyanions in geopolymer: Effects of alkaline activators and calcined hydrotalcite additive

Quanzhi Tian, Binglin Guo, Keiko Sasaki

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

抜粋

Geopolymers have been widely adopted to stabilize the cationic pollutants. However, few studies have focused on the immobilization of anionic species. In this study, the immobilization of SeO32– and SeO42– was explored for the first time using geopolymer activated by different alkaline solutions (NaOH and Na2SiO3) with and without calcined hydrotalcite (CHT), characterized by TCLP, XRD, FTIR, TG, NMR, XAFS, and N2 adsorption-desorption isotherm. Na2SiO3-activated geopolymers without CHT additive showed lower leaching percentages of SeO32– and SeO42– (approximately 10 % and 18 %) than NaOH-activated geopolymers (approximately 58 % and 74 %). It has been proven that electrostatic interaction is the main association mode of SeO32– and SeO42– in both NaOH- and Na2SiO3-activated geopolymers. Hence, compactness plays a vital role in the Se leaching from geopolymer. The addition of CHT reduced the compactnesses of both NaOH- and Na2SiO3-geopolymers. Due to the formation of hydrotalcite, the CHT additive contributed to immobilize SeO32– and SeO42– in NaOH-activated geopolymers. However, this phenomenon was not observed in Na2SiO3-activated geopolymers. Thus, the leaching amount of Se greatly increased from Na2SiO3-activated geopolymers with CHT additive. This study provides new insights on the application of geopolymer to immobilize anionic pollutants.

元の言語英語
記事番号121994
ジャーナルJournal of Hazardous Materials
387
DOI
出版物ステータス出版済み - 4 5 2020

    フィンガープリント

All Science Journal Classification (ASJC) codes

  • Environmental Engineering
  • Environmental Chemistry
  • Waste Management and Disposal
  • Pollution
  • Health, Toxicology and Mutagenesis

これを引用