Impedance measurement of simulated foaming slag for evaluation of gas phase fraction

Yusuke Harada, Masaki Ishihara, Noritaka Saito, Kunihiko Nakashima

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

抄録

The molten CaO-based slags used in modern hot metal pretreatment and steelmaking convertors often contain a dispersed gas phase. This is called foaming slag and is created by refining reactions that utilize metallurgical lime. The rheological behavior of foaming slag, which significantly affects the fluid flow of processes associated with the dissolution of lime, has been found to be controlled by the dispersed fraction of the gas phase. In the present study, a simulated slag foam was produced by dispersing inert gas bubbles in various liquids. The effect of varying the volume fraction of the dispersed gas phase on the impedance was then systematically investigated with cylindrical configurations of electrodes. The following equivalent circuit analyses on the semicircular Nyquist plots indicated that electrodes with foaming slag consisted of a series circuit of the solution resistance, a parallel junction of the double layer capacitance, and the resistance of the electric charge transfer. The Nyquist plots displayed semicircular shapes, and their diameters increased with the gas phase fraction despite the various viscosities of the liquid phases, which corresponded to the increase in the charge transfer resistance. The charge transfer resistances were calibrated on the basis of the increase in the electrode surface area and revealed a good linear relationship against the two-thirds power of the gas phase fraction in an ultrapure water and glycerol solution. This suggests a possible approach to quantitatively evaluating the gas phase fraction of a foaming slag by measuring the impedance.

元の言語英語
ページ(範囲)1733-1741
ページ数9
ジャーナルisij international
57
発行部数10
DOI
出版物ステータス出版済み - 1 1 2017

Fingerprint

Slags
Gases
Charge transfer
Lime
Electrodes
Noble Gases
Electric charge
Steelmaking
Liquids
Inert gases
Bubbles (in fluids)
Glycerol
Equivalent circuits
Refining
Foams
Molten materials
Flow of fluids
Volume fraction
Dissolution
Capacitance

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

これを引用

Impedance measurement of simulated foaming slag for evaluation of gas phase fraction. / Harada, Yusuke; Ishihara, Masaki; Saito, Noritaka; Nakashima, Kunihiko.

:: isij international, 巻 57, 番号 10, 01.01.2017, p. 1733-1741.

研究成果: ジャーナルへの寄稿記事

@article{c228ef738ade4156b586825c8ecb4fb3,
title = "Impedance measurement of simulated foaming slag for evaluation of gas phase fraction",
abstract = "The molten CaO-based slags used in modern hot metal pretreatment and steelmaking convertors often contain a dispersed gas phase. This is called foaming slag and is created by refining reactions that utilize metallurgical lime. The rheological behavior of foaming slag, which significantly affects the fluid flow of processes associated with the dissolution of lime, has been found to be controlled by the dispersed fraction of the gas phase. In the present study, a simulated slag foam was produced by dispersing inert gas bubbles in various liquids. The effect of varying the volume fraction of the dispersed gas phase on the impedance was then systematically investigated with cylindrical configurations of electrodes. The following equivalent circuit analyses on the semicircular Nyquist plots indicated that electrodes with foaming slag consisted of a series circuit of the solution resistance, a parallel junction of the double layer capacitance, and the resistance of the electric charge transfer. The Nyquist plots displayed semicircular shapes, and their diameters increased with the gas phase fraction despite the various viscosities of the liquid phases, which corresponded to the increase in the charge transfer resistance. The charge transfer resistances were calibrated on the basis of the increase in the electrode surface area and revealed a good linear relationship against the two-thirds power of the gas phase fraction in an ultrapure water and glycerol solution. This suggests a possible approach to quantitatively evaluating the gas phase fraction of a foaming slag by measuring the impedance.",
author = "Yusuke Harada and Masaki Ishihara and Noritaka Saito and Kunihiko Nakashima",
year = "2017",
month = "1",
day = "1",
doi = "10.2355/isijinternational.ISIJINT-2017-265",
language = "English",
volume = "57",
pages = "1733--1741",
journal = "ISIJ International",
issn = "0915-1559",
publisher = "Iron and Steel Institute of Japan",
number = "10",

}

TY - JOUR

T1 - Impedance measurement of simulated foaming slag for evaluation of gas phase fraction

AU - Harada, Yusuke

AU - Ishihara, Masaki

AU - Saito, Noritaka

AU - Nakashima, Kunihiko

PY - 2017/1/1

Y1 - 2017/1/1

N2 - The molten CaO-based slags used in modern hot metal pretreatment and steelmaking convertors often contain a dispersed gas phase. This is called foaming slag and is created by refining reactions that utilize metallurgical lime. The rheological behavior of foaming slag, which significantly affects the fluid flow of processes associated with the dissolution of lime, has been found to be controlled by the dispersed fraction of the gas phase. In the present study, a simulated slag foam was produced by dispersing inert gas bubbles in various liquids. The effect of varying the volume fraction of the dispersed gas phase on the impedance was then systematically investigated with cylindrical configurations of electrodes. The following equivalent circuit analyses on the semicircular Nyquist plots indicated that electrodes with foaming slag consisted of a series circuit of the solution resistance, a parallel junction of the double layer capacitance, and the resistance of the electric charge transfer. The Nyquist plots displayed semicircular shapes, and their diameters increased with the gas phase fraction despite the various viscosities of the liquid phases, which corresponded to the increase in the charge transfer resistance. The charge transfer resistances were calibrated on the basis of the increase in the electrode surface area and revealed a good linear relationship against the two-thirds power of the gas phase fraction in an ultrapure water and glycerol solution. This suggests a possible approach to quantitatively evaluating the gas phase fraction of a foaming slag by measuring the impedance.

AB - The molten CaO-based slags used in modern hot metal pretreatment and steelmaking convertors often contain a dispersed gas phase. This is called foaming slag and is created by refining reactions that utilize metallurgical lime. The rheological behavior of foaming slag, which significantly affects the fluid flow of processes associated with the dissolution of lime, has been found to be controlled by the dispersed fraction of the gas phase. In the present study, a simulated slag foam was produced by dispersing inert gas bubbles in various liquids. The effect of varying the volume fraction of the dispersed gas phase on the impedance was then systematically investigated with cylindrical configurations of electrodes. The following equivalent circuit analyses on the semicircular Nyquist plots indicated that electrodes with foaming slag consisted of a series circuit of the solution resistance, a parallel junction of the double layer capacitance, and the resistance of the electric charge transfer. The Nyquist plots displayed semicircular shapes, and their diameters increased with the gas phase fraction despite the various viscosities of the liquid phases, which corresponded to the increase in the charge transfer resistance. The charge transfer resistances were calibrated on the basis of the increase in the electrode surface area and revealed a good linear relationship against the two-thirds power of the gas phase fraction in an ultrapure water and glycerol solution. This suggests a possible approach to quantitatively evaluating the gas phase fraction of a foaming slag by measuring the impedance.

UR - http://www.scopus.com/inward/record.url?scp=85031782380&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85031782380&partnerID=8YFLogxK

U2 - 10.2355/isijinternational.ISIJINT-2017-265

DO - 10.2355/isijinternational.ISIJINT-2017-265

M3 - Article

VL - 57

SP - 1733

EP - 1741

JO - ISIJ International

JF - ISIJ International

SN - 0915-1559

IS - 10

ER -