Improved cooling capacity of a solar heat driven adsorption chiller

R. A. Rouf, N. Jahan, K. C.A. Alam, A. A. Sultan, B. B. Saha, S. C. Saha

    研究成果: Contribution to journalArticle査読

    6 被引用数 (Scopus)

    抄録

    This paper discusses two investigations which indicate the benefit of exploiting multiple adsorption containers to increase the cooling energy output of a limited supply of solar heat. First, the optimum working conditions on the output of a solar-powered 3-bed adsorption cooling scheme working in a series and secondly, the performance of a new parallel system of 4-beds has been investigated. It is seen that especially when the source of heat is limited, the output of solar assisted adsorption cooler can be enhanced if the total amount of adsorbent can be distributed in three identical small adsorption beds. As a continuation of the study with multiple beds, the performance of a newly proposed cooling unit with 4-beds has also been studied. This parallel system of 4-beds is considered in such a way that, when one conventional 2-bed chiller is in adsorption/desorption mode then the other chiller is in the preheat/pre-cool mode and the system goes on alternately. Both of these chillers are linked with a single evaporator and condenser, resulting in a continuous evaporation and condensation process. Both of these new systems with multiple beds can utilize maximum entropy as exploits a longer precool time and improves specific cooling capacity (SCC).

    本文言語英語
    論文番号100568
    ジャーナルCase Studies in Thermal Engineering
    17
    DOI
    出版ステータス出版済み - 2 2020

    All Science Journal Classification (ASJC) codes

    • Engineering (miscellaneous)
    • Fluid Flow and Transfer Processes

    フィンガープリント 「Improved cooling capacity of a solar heat driven adsorption chiller」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル