Improvement of nucleate boiling heat transfer characteristics by using immiscible mixtures

Shota Kita, Shunsuke Onishi, Yuta Fukuyama, Haruhiko Ohta

研究成果: 会議への寄与タイプ論文

1 引用 (Scopus)

抄録

The increase of critical heat flux, the reduction of surface temperature, the operation at pressure larger than the atmospheric to avoid the air mixing, and the reduction of surface temperature overshoot at the boiling incipience are fundamental requirements for the development of high-performance cooling systems by the application of boiling phenomena. The present authors found the nucleate boiling of immiscible mixtures to satisfy all of the above requirements [1], however, its knowledge has not been clarified yet. Pool boiling experiments for five immiscible mixtures, FC72/water, Novec649/water, Novec7200/water, FC72/n- Propanol, and FC72/i-Propanol, are performed at atmospheric pressure. When the thickness of more-volatile liquid with higher density on a horizontal heating surface is very small, a new phenomenon of "intermediate burnout" accompanied by a small jump of surface temperature is observed, and the heat transfer mode is changed from the nucleate boiling of more-volatile liquid with higher density to the natural convection or nucleate boiling of less-volatile liquid of lower density. The heat transfer due to nucleate boiling of lessvolatile liquid is enhanced by the generated vapor of more-volatile component, which results in the reduction of surface temperature. Moreover, CHF is increased by high subcooling of less-volatile liquid compressed by the high vapor partial pressure of more-volatile component. No serious overshoot at the boiling incipience is observed if the more-volatile liquid with higher density is contacting the horizontal heating surface before heating. This trend is especially important for e.g. The cooling of inverters for electric vehicles with a large heat generation during the acceleration.

元の言語英語
出版物ステータス出版済み - 1 1 2014
イベント15th International Heat Transfer Conference, IHTC 2014 - Kyoto, 日本
継続期間: 8 10 20148 15 2014

その他

その他15th International Heat Transfer Conference, IHTC 2014
日本
Kyoto
期間8/10/148/15/14

Fingerprint

nucleate boiling
Nucleate boiling
boiling
heat transfer
Heat transfer
Boiling liquids
surface temperature
Liquids
liquids
Propanol
Heating
heating
water
burnout
Water
inverters
Temperature
requirements
heat generation
cooling systems

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Condensed Matter Physics

これを引用

Kita, S., Onishi, S., Fukuyama, Y., & Ohta, H. (2014). Improvement of nucleate boiling heat transfer characteristics by using immiscible mixtures. 論文発表場所 15th International Heat Transfer Conference, IHTC 2014, Kyoto, 日本.

Improvement of nucleate boiling heat transfer characteristics by using immiscible mixtures. / Kita, Shota; Onishi, Shunsuke; Fukuyama, Yuta; Ohta, Haruhiko.

2014. 論文発表場所 15th International Heat Transfer Conference, IHTC 2014, Kyoto, 日本.

研究成果: 会議への寄与タイプ論文

Kita, S, Onishi, S, Fukuyama, Y & Ohta, H 2014, 'Improvement of nucleate boiling heat transfer characteristics by using immiscible mixtures' 論文発表場所 15th International Heat Transfer Conference, IHTC 2014, Kyoto, 日本, 8/10/14 - 8/15/14, .
Kita S, Onishi S, Fukuyama Y, Ohta H. Improvement of nucleate boiling heat transfer characteristics by using immiscible mixtures. 2014. 論文発表場所 15th International Heat Transfer Conference, IHTC 2014, Kyoto, 日本.
Kita, Shota ; Onishi, Shunsuke ; Fukuyama, Yuta ; Ohta, Haruhiko. / Improvement of nucleate boiling heat transfer characteristics by using immiscible mixtures. 論文発表場所 15th International Heat Transfer Conference, IHTC 2014, Kyoto, 日本.
@conference{78f1be422bac43e3901b9d22bcebd5e5,
title = "Improvement of nucleate boiling heat transfer characteristics by using immiscible mixtures",
abstract = "The increase of critical heat flux, the reduction of surface temperature, the operation at pressure larger than the atmospheric to avoid the air mixing, and the reduction of surface temperature overshoot at the boiling incipience are fundamental requirements for the development of high-performance cooling systems by the application of boiling phenomena. The present authors found the nucleate boiling of immiscible mixtures to satisfy all of the above requirements [1], however, its knowledge has not been clarified yet. Pool boiling experiments for five immiscible mixtures, FC72/water, Novec649/water, Novec7200/water, FC72/n- Propanol, and FC72/i-Propanol, are performed at atmospheric pressure. When the thickness of more-volatile liquid with higher density on a horizontal heating surface is very small, a new phenomenon of {"}intermediate burnout{"} accompanied by a small jump of surface temperature is observed, and the heat transfer mode is changed from the nucleate boiling of more-volatile liquid with higher density to the natural convection or nucleate boiling of less-volatile liquid of lower density. The heat transfer due to nucleate boiling of lessvolatile liquid is enhanced by the generated vapor of more-volatile component, which results in the reduction of surface temperature. Moreover, CHF is increased by high subcooling of less-volatile liquid compressed by the high vapor partial pressure of more-volatile component. No serious overshoot at the boiling incipience is observed if the more-volatile liquid with higher density is contacting the horizontal heating surface before heating. This trend is especially important for e.g. The cooling of inverters for electric vehicles with a large heat generation during the acceleration.",
author = "Shota Kita and Shunsuke Onishi and Yuta Fukuyama and Haruhiko Ohta",
year = "2014",
month = "1",
day = "1",
language = "English",
note = "15th International Heat Transfer Conference, IHTC 2014 ; Conference date: 10-08-2014 Through 15-08-2014",

}

TY - CONF

T1 - Improvement of nucleate boiling heat transfer characteristics by using immiscible mixtures

AU - Kita, Shota

AU - Onishi, Shunsuke

AU - Fukuyama, Yuta

AU - Ohta, Haruhiko

PY - 2014/1/1

Y1 - 2014/1/1

N2 - The increase of critical heat flux, the reduction of surface temperature, the operation at pressure larger than the atmospheric to avoid the air mixing, and the reduction of surface temperature overshoot at the boiling incipience are fundamental requirements for the development of high-performance cooling systems by the application of boiling phenomena. The present authors found the nucleate boiling of immiscible mixtures to satisfy all of the above requirements [1], however, its knowledge has not been clarified yet. Pool boiling experiments for five immiscible mixtures, FC72/water, Novec649/water, Novec7200/water, FC72/n- Propanol, and FC72/i-Propanol, are performed at atmospheric pressure. When the thickness of more-volatile liquid with higher density on a horizontal heating surface is very small, a new phenomenon of "intermediate burnout" accompanied by a small jump of surface temperature is observed, and the heat transfer mode is changed from the nucleate boiling of more-volatile liquid with higher density to the natural convection or nucleate boiling of less-volatile liquid of lower density. The heat transfer due to nucleate boiling of lessvolatile liquid is enhanced by the generated vapor of more-volatile component, which results in the reduction of surface temperature. Moreover, CHF is increased by high subcooling of less-volatile liquid compressed by the high vapor partial pressure of more-volatile component. No serious overshoot at the boiling incipience is observed if the more-volatile liquid with higher density is contacting the horizontal heating surface before heating. This trend is especially important for e.g. The cooling of inverters for electric vehicles with a large heat generation during the acceleration.

AB - The increase of critical heat flux, the reduction of surface temperature, the operation at pressure larger than the atmospheric to avoid the air mixing, and the reduction of surface temperature overshoot at the boiling incipience are fundamental requirements for the development of high-performance cooling systems by the application of boiling phenomena. The present authors found the nucleate boiling of immiscible mixtures to satisfy all of the above requirements [1], however, its knowledge has not been clarified yet. Pool boiling experiments for five immiscible mixtures, FC72/water, Novec649/water, Novec7200/water, FC72/n- Propanol, and FC72/i-Propanol, are performed at atmospheric pressure. When the thickness of more-volatile liquid with higher density on a horizontal heating surface is very small, a new phenomenon of "intermediate burnout" accompanied by a small jump of surface temperature is observed, and the heat transfer mode is changed from the nucleate boiling of more-volatile liquid with higher density to the natural convection or nucleate boiling of less-volatile liquid of lower density. The heat transfer due to nucleate boiling of lessvolatile liquid is enhanced by the generated vapor of more-volatile component, which results in the reduction of surface temperature. Moreover, CHF is increased by high subcooling of less-volatile liquid compressed by the high vapor partial pressure of more-volatile component. No serious overshoot at the boiling incipience is observed if the more-volatile liquid with higher density is contacting the horizontal heating surface before heating. This trend is especially important for e.g. The cooling of inverters for electric vehicles with a large heat generation during the acceleration.

UR - http://www.scopus.com/inward/record.url?scp=84964561189&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84964561189&partnerID=8YFLogxK

M3 - Paper

ER -