Improvement of strengths - ductility balance by copper addition in 9%Ni steels

Nobuo Nakada, Junaidi Syarif, Toshihiro Tsuchiyma, Setsuo Takaki

研究成果: Contribution to journalArticle

73 引用 (Scopus)

抜粋

Effect of Cu addition on mechanical properties of a cryogenic 9%Ni steel was studied by means of tensile testing, and then strength-ductility balance was discussed in the Cu bearing 9%Ni steel in connection with microstructural characteristics. Cu particles precipitated finely within martensite matrix on tempering. The Cu addition also increased the amount of reversed austenite formed along lath boundaries, because the Cu was condensed into the reversed austenite and changed the stability of austenite. On the other hand, yield strength and tensile strength of 9%Ni steel were increased by Cu addition owing to precipitation strengthening by the Cu particles without losing ductility. The improvement of uniform elongation by Cu addition was explained in terms of deformation-induced martensitic transformation of reversed austenite (TRIP assisted effect). It was concluded that the Cu addition increases the work-hardening rate through the TRIP assisted effect and suppresses the occurrence of necking deformation.

元の言語英語
ページ(範囲)137-144
ページ数8
ジャーナルMaterials Science and Engineering A
374
発行部数1-2
DOI
出版物ステータス出版済み - 6 15 2004

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント Improvement of strengths - ductility balance by copper addition in 9%Ni steels' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用