In-situ measurement of solute partition coefficient in fe-cr-ni-mo alloys by using x-ray imaging and x-ray florescence analysis

Iori Uwabe, Kento Dobara, Kohei Morishita, Tomoya Nagira, Hideyuki Yasuda

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

抄録

This study demonstrates in-situ measurement of solute partition coefficient in multicomponent alloys, using X-ray transmission imaging and X-ray florescence spectroscopy. The developed technique was applied to determine partition coefficients of Cr, Ni and Mo between δ phase and liquid phase in Fe-17.4Cr-12.6Ni-2.0Mo-1.6Mn-0.6Si alloys (mass%). In the observation and measurement, X-ray fluorescence spectra were directly obtained by irradiating the incident X-ray beam (23keV) to the solid phase or the liquid phase near solid/liquid interface. The partition coefficients were simply determined from the X-ray florescence analysis. In addition, successive measurements during unidirectional solidification allowed to measure change in partition coefficient along solidification path. During the solidification, partition coefficients of Cr, Ni and Mo changed from 1.01to 1.08, from 0.76 to 0.70 and from 0.86 to 0.74, respectively. The present study proved that the developed technique was applicable to determine partition coefficients of 3d and 4d transition elements of which characteristic X-ray energies ranged from 4 to 20keV.

元の言語英語
ページ(範囲)678-687
ページ数10
ジャーナルTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
103
発行部数12
DOI
出版物ステータス出版済み - 1 1 2017

Fingerprint

x ray analysis
in situ measurement
partitions
solutes
Solidification
Imaging techniques
X rays
coefficients
solidification
Liquids
Transition Elements
x rays
X ray analysis
liquid phases
X ray spectroscopy
Fluorescence
liquid-solid interfaces
solid phases
transition metals
fluorescence

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Physical and Theoretical Chemistry
  • Metals and Alloys
  • Materials Chemistry

これを引用

In-situ measurement of solute partition coefficient in fe-cr-ni-mo alloys by using x-ray imaging and x-ray florescence analysis. / Uwabe, Iori; Dobara, Kento; Morishita, Kohei; Nagira, Tomoya; Yasuda, Hideyuki.

:: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 巻 103, 番号 12, 01.01.2017, p. 678-687.

研究成果: ジャーナルへの寄稿記事

@article{bf70779b0b0148a1ab4d041dd2102e85,
title = "In-situ measurement of solute partition coefficient in fe-cr-ni-mo alloys by using x-ray imaging and x-ray florescence analysis",
abstract = "This study demonstrates in-situ measurement of solute partition coefficient in multicomponent alloys, using X-ray transmission imaging and X-ray florescence spectroscopy. The developed technique was applied to determine partition coefficients of Cr, Ni and Mo between δ phase and liquid phase in Fe-17.4Cr-12.6Ni-2.0Mo-1.6Mn-0.6Si alloys (mass{\%}). In the observation and measurement, X-ray fluorescence spectra were directly obtained by irradiating the incident X-ray beam (23keV) to the solid phase or the liquid phase near solid/liquid interface. The partition coefficients were simply determined from the X-ray florescence analysis. In addition, successive measurements during unidirectional solidification allowed to measure change in partition coefficient along solidification path. During the solidification, partition coefficients of Cr, Ni and Mo changed from 1.01to 1.08, from 0.76 to 0.70 and from 0.86 to 0.74, respectively. The present study proved that the developed technique was applicable to determine partition coefficients of 3d and 4d transition elements of which characteristic X-ray energies ranged from 4 to 20keV.",
author = "Iori Uwabe and Kento Dobara and Kohei Morishita and Tomoya Nagira and Hideyuki Yasuda",
year = "2017",
month = "1",
day = "1",
doi = "10.2355/tetsutohagane.TETSU-2017-077",
language = "English",
volume = "103",
pages = "678--687",
journal = "Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan",
issn = "0021-1575",
publisher = "一般社団法人 日本鉄鋼協会",
number = "12",

}

TY - JOUR

T1 - In-situ measurement of solute partition coefficient in fe-cr-ni-mo alloys by using x-ray imaging and x-ray florescence analysis

AU - Uwabe, Iori

AU - Dobara, Kento

AU - Morishita, Kohei

AU - Nagira, Tomoya

AU - Yasuda, Hideyuki

PY - 2017/1/1

Y1 - 2017/1/1

N2 - This study demonstrates in-situ measurement of solute partition coefficient in multicomponent alloys, using X-ray transmission imaging and X-ray florescence spectroscopy. The developed technique was applied to determine partition coefficients of Cr, Ni and Mo between δ phase and liquid phase in Fe-17.4Cr-12.6Ni-2.0Mo-1.6Mn-0.6Si alloys (mass%). In the observation and measurement, X-ray fluorescence spectra were directly obtained by irradiating the incident X-ray beam (23keV) to the solid phase or the liquid phase near solid/liquid interface. The partition coefficients were simply determined from the X-ray florescence analysis. In addition, successive measurements during unidirectional solidification allowed to measure change in partition coefficient along solidification path. During the solidification, partition coefficients of Cr, Ni and Mo changed from 1.01to 1.08, from 0.76 to 0.70 and from 0.86 to 0.74, respectively. The present study proved that the developed technique was applicable to determine partition coefficients of 3d and 4d transition elements of which characteristic X-ray energies ranged from 4 to 20keV.

AB - This study demonstrates in-situ measurement of solute partition coefficient in multicomponent alloys, using X-ray transmission imaging and X-ray florescence spectroscopy. The developed technique was applied to determine partition coefficients of Cr, Ni and Mo between δ phase and liquid phase in Fe-17.4Cr-12.6Ni-2.0Mo-1.6Mn-0.6Si alloys (mass%). In the observation and measurement, X-ray fluorescence spectra were directly obtained by irradiating the incident X-ray beam (23keV) to the solid phase or the liquid phase near solid/liquid interface. The partition coefficients were simply determined from the X-ray florescence analysis. In addition, successive measurements during unidirectional solidification allowed to measure change in partition coefficient along solidification path. During the solidification, partition coefficients of Cr, Ni and Mo changed from 1.01to 1.08, from 0.76 to 0.70 and from 0.86 to 0.74, respectively. The present study proved that the developed technique was applicable to determine partition coefficients of 3d and 4d transition elements of which characteristic X-ray energies ranged from 4 to 20keV.

UR - http://www.scopus.com/inward/record.url?scp=85037068681&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85037068681&partnerID=8YFLogxK

U2 - 10.2355/tetsutohagane.TETSU-2017-077

DO - 10.2355/tetsutohagane.TETSU-2017-077

M3 - Article

AN - SCOPUS:85037068681

VL - 103

SP - 678

EP - 687

JO - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

JF - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

SN - 0021-1575

IS - 12

ER -