Influence of engine size and fuel properties on exhaust emissions from diesel engines

K. Takasaki, K. Groth, K. Maeda

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

2 引用 (Scopus)

抜粋

Nowadays not only small, high speed diesel engines for automobiles, but also larger sized, medium and low speed engines for locomotives, generators and ships will be under some exhaust emissions restrictions. However, not much emissions research work on larger engines has been performed to establish whether measures used for reducing emissions of smaller engines are also effective on larger ones. This present paper covers emission data from four diesel engines having a bore of 110, 200, 320 and 450mm. The influence of (1) the size or speed of engine, (2) the fuel (gas oil or bunker fuel oil) and (3) means used to reduce NOx emissions such as 'fuel injection timing retard' and 'exhaust gas re-circulation' are discussed. One reason for higher particulate emissions from bunker fuel oil is clarified using the visualization of burning spray in a model combustion chamber.

元の言語英語
ホスト出版物のタイトルAmerican Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE
編集者T. Uzkan
出版者ASME
ページ63-70
ページ数8
26-1
出版物ステータス出版済み - 1996
イベントProceedings of the 1996 Spring Technical Conference of the ASME Internal Combustion Engine Division. Part 3 (of 3) - Youngstown, OH, USA
継続期間: 4 21 19964 24 1996

その他

その他Proceedings of the 1996 Spring Technical Conference of the ASME Internal Combustion Engine Division. Part 3 (of 3)
Youngstown, OH, USA
期間4/21/964/24/96

All Science Journal Classification (ASJC) codes

  • Engineering(all)

フィンガープリント Influence of engine size and fuel properties on exhaust emissions from diesel engines' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Takasaki, K., Groth, K., & Maeda, K. (1996). Influence of engine size and fuel properties on exhaust emissions from diesel engines. : T. Uzkan (版), American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE (巻 26-1, pp. 63-70). ASME.