Influence of gas flow and improvement of homogeneity on the distribution of critical current density in YBCO coated conductor processed by TFA-MOD method

Kei Shiohara, Kohei Higashikawa, Teppei Kawaguchi, Masayoshi Inoue, Takanobu Kiss, Masateru Yoshizumi, Teruo Izumi

研究成果: ジャーナルへの寄稿Conference article

抄録

Using a scanning Hall-probe microscopy, we have investigated in-plane distribution of critical current density in TFA-MOD processed YBCO coated conductors. We compared the distributions of critical current density for two kinds of coated conductors processed with different directions of gas flow at the calcinations. As a result, it was found that the direction of the gas flow largely influenced the distribution of critical current density. For example, the maximum value of critical current density was 1.5 times higher than the average for a sample processed with a gas flow in width direction. On the other hand, the distribution of critical current density was relatively uniform for the one with a gas flow in axial direction perpendicular to the surface of the conductor. These findings will be very important information for the optimization of the manufacturer processes for the conductors. Actually, a very uniform distribution of critical current density has been observed for a coated conductor produced by an optimized process. This demonstrates a high potential of TFA-MOD processed YBCO coated conductors for practical applications.

元の言語英語
ページ(範囲)1637-1642
ページ数6
ジャーナルPhysics Procedia
36
DOI
出版物ステータス出版済み - 1 1 2012
イベントSuperconductivity Centennial Conference, SCC 2011 - The Hague, オランダ
継続期間: 9 18 20119 23 2011

Fingerprint

homogeneity
gas flow
critical current
conductors
current density
roasting
microscopy
optimization
scanning
probes

All Science Journal Classification (ASJC) codes

  • Physics and Astronomy(all)

これを引用

Influence of gas flow and improvement of homogeneity on the distribution of critical current density in YBCO coated conductor processed by TFA-MOD method. / Shiohara, Kei; Higashikawa, Kohei; Kawaguchi, Teppei; Inoue, Masayoshi; Kiss, Takanobu; Yoshizumi, Masateru; Izumi, Teruo.

:: Physics Procedia, 巻 36, 01.01.2012, p. 1637-1642.

研究成果: ジャーナルへの寄稿Conference article

@article{bbfda3abadd94960b17fbbce96a9ed27,
title = "Influence of gas flow and improvement of homogeneity on the distribution of critical current density in YBCO coated conductor processed by TFA-MOD method",
abstract = "Using a scanning Hall-probe microscopy, we have investigated in-plane distribution of critical current density in TFA-MOD processed YBCO coated conductors. We compared the distributions of critical current density for two kinds of coated conductors processed with different directions of gas flow at the calcinations. As a result, it was found that the direction of the gas flow largely influenced the distribution of critical current density. For example, the maximum value of critical current density was 1.5 times higher than the average for a sample processed with a gas flow in width direction. On the other hand, the distribution of critical current density was relatively uniform for the one with a gas flow in axial direction perpendicular to the surface of the conductor. These findings will be very important information for the optimization of the manufacturer processes for the conductors. Actually, a very uniform distribution of critical current density has been observed for a coated conductor produced by an optimized process. This demonstrates a high potential of TFA-MOD processed YBCO coated conductors for practical applications.",
author = "Kei Shiohara and Kohei Higashikawa and Teppei Kawaguchi and Masayoshi Inoue and Takanobu Kiss and Masateru Yoshizumi and Teruo Izumi",
year = "2012",
month = "1",
day = "1",
doi = "10.1016/j.phpro.2012.06.321",
language = "English",
volume = "36",
pages = "1637--1642",
journal = "Physics Procedia",
issn = "1875-3892",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Influence of gas flow and improvement of homogeneity on the distribution of critical current density in YBCO coated conductor processed by TFA-MOD method

AU - Shiohara, Kei

AU - Higashikawa, Kohei

AU - Kawaguchi, Teppei

AU - Inoue, Masayoshi

AU - Kiss, Takanobu

AU - Yoshizumi, Masateru

AU - Izumi, Teruo

PY - 2012/1/1

Y1 - 2012/1/1

N2 - Using a scanning Hall-probe microscopy, we have investigated in-plane distribution of critical current density in TFA-MOD processed YBCO coated conductors. We compared the distributions of critical current density for two kinds of coated conductors processed with different directions of gas flow at the calcinations. As a result, it was found that the direction of the gas flow largely influenced the distribution of critical current density. For example, the maximum value of critical current density was 1.5 times higher than the average for a sample processed with a gas flow in width direction. On the other hand, the distribution of critical current density was relatively uniform for the one with a gas flow in axial direction perpendicular to the surface of the conductor. These findings will be very important information for the optimization of the manufacturer processes for the conductors. Actually, a very uniform distribution of critical current density has been observed for a coated conductor produced by an optimized process. This demonstrates a high potential of TFA-MOD processed YBCO coated conductors for practical applications.

AB - Using a scanning Hall-probe microscopy, we have investigated in-plane distribution of critical current density in TFA-MOD processed YBCO coated conductors. We compared the distributions of critical current density for two kinds of coated conductors processed with different directions of gas flow at the calcinations. As a result, it was found that the direction of the gas flow largely influenced the distribution of critical current density. For example, the maximum value of critical current density was 1.5 times higher than the average for a sample processed with a gas flow in width direction. On the other hand, the distribution of critical current density was relatively uniform for the one with a gas flow in axial direction perpendicular to the surface of the conductor. These findings will be very important information for the optimization of the manufacturer processes for the conductors. Actually, a very uniform distribution of critical current density has been observed for a coated conductor produced by an optimized process. This demonstrates a high potential of TFA-MOD processed YBCO coated conductors for practical applications.

UR - http://www.scopus.com/inward/record.url?scp=84960449371&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84960449371&partnerID=8YFLogxK

U2 - 10.1016/j.phpro.2012.06.321

DO - 10.1016/j.phpro.2012.06.321

M3 - Conference article

VL - 36

SP - 1637

EP - 1642

JO - Physics Procedia

JF - Physics Procedia

SN - 1875-3892

ER -