Influence of hydrogen and frequency on fatigue crack growth behavior of Cr-Mo steel

Saburo Matsuoka, Hiroyuki Tanaka, Nobuhiro Homma, Yukitaka Murakami

研究成果: ジャーナルへの寄稿記事

54 引用 (Scopus)

抄録

Fatigue tests on Cr-Mo steel quenched at 860°C and tempered at 580°C were carried out under the frequencies of 0.2, 2, and 20 Hz with specimens containing a small artificial hole. An additional test in which the test frequency was alternately switched between 0.02 and 2 Hz was carried out. Hydrogen charging to the specimens was carried out by an immersion method. The fatigue life of the hydrogen-charged specimens remarkably decreased in comparison with that of the uncharged specimens. The fatigue crack growth rate da/dN increased with decreasing the test frequency f. The acceleration of da/dN saturated at Δ K, < 17 MPa √m for f ≤ 2 Hz. The presence of the upper bound for the fatigue crack growth acceleration was found with respect to the effects of hydrogen and test frequency in a hydrogen environment. The test switching the frequency between 0.02 and 2 Hz resulted the difference in fatigue crack growth morphology which is presumed to be caused by the difference in hydrogen concentration in the vicinity of crack tip. The particular crack morphology under the low test frequency with hydrogen was the localization of the slip around the crack tip and the linearization of the crack growth path. The hydrogen-enhanced striation formation model which was proposed to explain the effect of hydrogen on the fatigue crack growth for an austenitic stainless steel and low carbon steel can be applied also to the quenched and tempered Cr-Mo steel in this study.

元の言語英語
ページ(範囲)101-112
ページ数12
ジャーナルInternational Journal of Fracture
168
発行部数1
DOI
出版物ステータス出版済み - 3 1 2011

Fingerprint

Fatigue Crack Growth
Fatigue crack propagation
Hydrogen
Steel
Crack Tip
Crack tips
Fatigue of materials
Austenitic Stainless Steel
Crack Growth Rate
Influence
Crack Growth
Fatigue Life
Low carbon steel
Austenitic stainless steel
Immersion
Linearization
Slip
Fatigue
Crack propagation
Crack

All Science Journal Classification (ASJC) codes

  • Computational Mechanics
  • Modelling and Simulation
  • Mechanics of Materials

これを引用

Influence of hydrogen and frequency on fatigue crack growth behavior of Cr-Mo steel. / Matsuoka, Saburo; Tanaka, Hiroyuki; Homma, Nobuhiro; Murakami, Yukitaka.

:: International Journal of Fracture, 巻 168, 番号 1, 01.03.2011, p. 101-112.

研究成果: ジャーナルへの寄稿記事

Matsuoka, Saburo ; Tanaka, Hiroyuki ; Homma, Nobuhiro ; Murakami, Yukitaka. / Influence of hydrogen and frequency on fatigue crack growth behavior of Cr-Mo steel. :: International Journal of Fracture. 2011 ; 巻 168, 番号 1. pp. 101-112.
@article{08bd83d9e8134004a69d484dafcb7196,
title = "Influence of hydrogen and frequency on fatigue crack growth behavior of Cr-Mo steel",
abstract = "Fatigue tests on Cr-Mo steel quenched at 860°C and tempered at 580°C were carried out under the frequencies of 0.2, 2, and 20 Hz with specimens containing a small artificial hole. An additional test in which the test frequency was alternately switched between 0.02 and 2 Hz was carried out. Hydrogen charging to the specimens was carried out by an immersion method. The fatigue life of the hydrogen-charged specimens remarkably decreased in comparison with that of the uncharged specimens. The fatigue crack growth rate da/dN increased with decreasing the test frequency f. The acceleration of da/dN saturated at Δ K, < 17 MPa √m for f ≤ 2 Hz. The presence of the upper bound for the fatigue crack growth acceleration was found with respect to the effects of hydrogen and test frequency in a hydrogen environment. The test switching the frequency between 0.02 and 2 Hz resulted the difference in fatigue crack growth morphology which is presumed to be caused by the difference in hydrogen concentration in the vicinity of crack tip. The particular crack morphology under the low test frequency with hydrogen was the localization of the slip around the crack tip and the linearization of the crack growth path. The hydrogen-enhanced striation formation model which was proposed to explain the effect of hydrogen on the fatigue crack growth for an austenitic stainless steel and low carbon steel can be applied also to the quenched and tempered Cr-Mo steel in this study.",
author = "Saburo Matsuoka and Hiroyuki Tanaka and Nobuhiro Homma and Yukitaka Murakami",
year = "2011",
month = "3",
day = "1",
doi = "10.1007/s10704-010-9560-z",
language = "English",
volume = "168",
pages = "101--112",
journal = "International Journal of Fracture",
issn = "0376-9429",
publisher = "Springer Netherlands",
number = "1",

}

TY - JOUR

T1 - Influence of hydrogen and frequency on fatigue crack growth behavior of Cr-Mo steel

AU - Matsuoka, Saburo

AU - Tanaka, Hiroyuki

AU - Homma, Nobuhiro

AU - Murakami, Yukitaka

PY - 2011/3/1

Y1 - 2011/3/1

N2 - Fatigue tests on Cr-Mo steel quenched at 860°C and tempered at 580°C were carried out under the frequencies of 0.2, 2, and 20 Hz with specimens containing a small artificial hole. An additional test in which the test frequency was alternately switched between 0.02 and 2 Hz was carried out. Hydrogen charging to the specimens was carried out by an immersion method. The fatigue life of the hydrogen-charged specimens remarkably decreased in comparison with that of the uncharged specimens. The fatigue crack growth rate da/dN increased with decreasing the test frequency f. The acceleration of da/dN saturated at Δ K, < 17 MPa √m for f ≤ 2 Hz. The presence of the upper bound for the fatigue crack growth acceleration was found with respect to the effects of hydrogen and test frequency in a hydrogen environment. The test switching the frequency between 0.02 and 2 Hz resulted the difference in fatigue crack growth morphology which is presumed to be caused by the difference in hydrogen concentration in the vicinity of crack tip. The particular crack morphology under the low test frequency with hydrogen was the localization of the slip around the crack tip and the linearization of the crack growth path. The hydrogen-enhanced striation formation model which was proposed to explain the effect of hydrogen on the fatigue crack growth for an austenitic stainless steel and low carbon steel can be applied also to the quenched and tempered Cr-Mo steel in this study.

AB - Fatigue tests on Cr-Mo steel quenched at 860°C and tempered at 580°C were carried out under the frequencies of 0.2, 2, and 20 Hz with specimens containing a small artificial hole. An additional test in which the test frequency was alternately switched between 0.02 and 2 Hz was carried out. Hydrogen charging to the specimens was carried out by an immersion method. The fatigue life of the hydrogen-charged specimens remarkably decreased in comparison with that of the uncharged specimens. The fatigue crack growth rate da/dN increased with decreasing the test frequency f. The acceleration of da/dN saturated at Δ K, < 17 MPa √m for f ≤ 2 Hz. The presence of the upper bound for the fatigue crack growth acceleration was found with respect to the effects of hydrogen and test frequency in a hydrogen environment. The test switching the frequency between 0.02 and 2 Hz resulted the difference in fatigue crack growth morphology which is presumed to be caused by the difference in hydrogen concentration in the vicinity of crack tip. The particular crack morphology under the low test frequency with hydrogen was the localization of the slip around the crack tip and the linearization of the crack growth path. The hydrogen-enhanced striation formation model which was proposed to explain the effect of hydrogen on the fatigue crack growth for an austenitic stainless steel and low carbon steel can be applied also to the quenched and tempered Cr-Mo steel in this study.

UR - http://www.scopus.com/inward/record.url?scp=79951677189&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79951677189&partnerID=8YFLogxK

U2 - 10.1007/s10704-010-9560-z

DO - 10.1007/s10704-010-9560-z

M3 - Article

AN - SCOPUS:79951677189

VL - 168

SP - 101

EP - 112

JO - International Journal of Fracture

JF - International Journal of Fracture

SN - 0376-9429

IS - 1

ER -