Influence of Lipid Sorption on Fatigue Strength of Segmented Poly(urethaneurea)s with Various Hard Segment Component

Atsushi Takahara, Tisato Kajiyama

研究成果: ジャーナルへの寄稿記事

4 引用 (Scopus)

抄録

The relationships between aggregation states of hard segments in segmented poly(urethaneureas) and fatigue behavior after lipids sorption are reported. The SPUU used in this study consists of hard and soft segments. The soft segment is composed of poly(tetramethylene glycol) (PTMG) with number average molecular weight of Mn and 4,4′-diphenylmethane diisocyanate (MDI). The hard segment consists of MDI and various diamines. The temperature dependences of infrared spectra and dynamic viscoelasticity revealed that the aggragation of hard segment is stronger for the hard segment consisted of MDI-ethylenediamine (EDA) (Biomer®) or MDI-1,2-propylenediamine (PDA) (TM Mn) than for the one consisted of the random sequence of MDI-EDA and MDI-4,4′-diaminodiphenylmethane (DAM) (TU Mn). The degree of phase mixing between the hard and soft segments in TU Mn is more extensive than that in TM Mn, The specimen after immersing in lipids solution showed weight increase due to lipids sorption. The amount of increase in weight after lipid sorption was larger for TU Mn than for TM Mn. Also, the temperature dependences of dynamic viscoelasticity of the specimen after imersing in lipids solution revealed that disordered hard segments of TU Mn lost their aggregation strength after lipids sorption. The fatigue strength of TU Mn after lipids sorption decreased extensively and showed the formation of microcracks near fatigue fracture surface. This is attributed to the adsorbed lipid. However, TM Mn and Biomer did not show reduction of fatigue strength after lipids sorption. These results indicate that SPUU with disordered hard segments loses its fatigue strength in a biological environment.

元の言語英語
ページ(範囲)793-801
ページ数9
ジャーナルKOBUNSHI RONBUNSHU
42
発行部数11
DOI
出版物ステータス出版済み - 1 1 1985

Fingerprint

fatigue
Lipids
Sorption
sorption
lipid
ethylenediamine
viscoelasticity
Viscoelasticity
Agglomeration
Fatigue of materials
Fatigue strength
Glycols
Diamines
microcrack
Microcracks
4,4'-diphenylmethane diisocyanate
temperature
Molecular weight
Infrared radiation
Temperature

All Science Journal Classification (ASJC) codes

  • Chemical Engineering (miscellaneous)
  • Materials Science (miscellaneous)
  • Environmental Science(all)
  • Polymers and Plastics

これを引用

Influence of Lipid Sorption on Fatigue Strength of Segmented Poly(urethaneurea)s with Various Hard Segment Component. / Takahara, Atsushi; Kajiyama, Tisato.

:: KOBUNSHI RONBUNSHU, 巻 42, 番号 11, 01.01.1985, p. 793-801.

研究成果: ジャーナルへの寄稿記事

@article{2714cdd87063469cb94a8597c40b5759,
title = "Influence of Lipid Sorption on Fatigue Strength of Segmented Poly(urethaneurea)s with Various Hard Segment Component",
abstract = "The relationships between aggregation states of hard segments in segmented poly(urethaneureas) and fatigue behavior after lipids sorption are reported. The SPUU used in this study consists of hard and soft segments. The soft segment is composed of poly(tetramethylene glycol) (PTMG) with number average molecular weight of Mn and 4,4′-diphenylmethane diisocyanate (MDI). The hard segment consists of MDI and various diamines. The temperature dependences of infrared spectra and dynamic viscoelasticity revealed that the aggragation of hard segment is stronger for the hard segment consisted of MDI-ethylenediamine (EDA) (Biomer{\circledR}) or MDI-1,2-propylenediamine (PDA) (TM Mn) than for the one consisted of the random sequence of MDI-EDA and MDI-4,4′-diaminodiphenylmethane (DAM) (TU Mn). The degree of phase mixing between the hard and soft segments in TU Mn is more extensive than that in TM Mn, The specimen after immersing in lipids solution showed weight increase due to lipids sorption. The amount of increase in weight after lipid sorption was larger for TU Mn than for TM Mn. Also, the temperature dependences of dynamic viscoelasticity of the specimen after imersing in lipids solution revealed that disordered hard segments of TU Mn lost their aggregation strength after lipids sorption. The fatigue strength of TU Mn after lipids sorption decreased extensively and showed the formation of microcracks near fatigue fracture surface. This is attributed to the adsorbed lipid. However, TM Mn and Biomer did not show reduction of fatigue strength after lipids sorption. These results indicate that SPUU with disordered hard segments loses its fatigue strength in a biological environment.",
author = "Atsushi Takahara and Tisato Kajiyama",
year = "1985",
month = "1",
day = "1",
doi = "10.1295/koron.42.793",
language = "English",
volume = "42",
pages = "793--801",
journal = "Kobunshi Ronbunshu",
issn = "0386-2186",
publisher = "The Society of Polymer Science, Japan",
number = "11",

}

TY - JOUR

T1 - Influence of Lipid Sorption on Fatigue Strength of Segmented Poly(urethaneurea)s with Various Hard Segment Component

AU - Takahara, Atsushi

AU - Kajiyama, Tisato

PY - 1985/1/1

Y1 - 1985/1/1

N2 - The relationships between aggregation states of hard segments in segmented poly(urethaneureas) and fatigue behavior after lipids sorption are reported. The SPUU used in this study consists of hard and soft segments. The soft segment is composed of poly(tetramethylene glycol) (PTMG) with number average molecular weight of Mn and 4,4′-diphenylmethane diisocyanate (MDI). The hard segment consists of MDI and various diamines. The temperature dependences of infrared spectra and dynamic viscoelasticity revealed that the aggragation of hard segment is stronger for the hard segment consisted of MDI-ethylenediamine (EDA) (Biomer®) or MDI-1,2-propylenediamine (PDA) (TM Mn) than for the one consisted of the random sequence of MDI-EDA and MDI-4,4′-diaminodiphenylmethane (DAM) (TU Mn). The degree of phase mixing between the hard and soft segments in TU Mn is more extensive than that in TM Mn, The specimen after immersing in lipids solution showed weight increase due to lipids sorption. The amount of increase in weight after lipid sorption was larger for TU Mn than for TM Mn. Also, the temperature dependences of dynamic viscoelasticity of the specimen after imersing in lipids solution revealed that disordered hard segments of TU Mn lost their aggregation strength after lipids sorption. The fatigue strength of TU Mn after lipids sorption decreased extensively and showed the formation of microcracks near fatigue fracture surface. This is attributed to the adsorbed lipid. However, TM Mn and Biomer did not show reduction of fatigue strength after lipids sorption. These results indicate that SPUU with disordered hard segments loses its fatigue strength in a biological environment.

AB - The relationships between aggregation states of hard segments in segmented poly(urethaneureas) and fatigue behavior after lipids sorption are reported. The SPUU used in this study consists of hard and soft segments. The soft segment is composed of poly(tetramethylene glycol) (PTMG) with number average molecular weight of Mn and 4,4′-diphenylmethane diisocyanate (MDI). The hard segment consists of MDI and various diamines. The temperature dependences of infrared spectra and dynamic viscoelasticity revealed that the aggragation of hard segment is stronger for the hard segment consisted of MDI-ethylenediamine (EDA) (Biomer®) or MDI-1,2-propylenediamine (PDA) (TM Mn) than for the one consisted of the random sequence of MDI-EDA and MDI-4,4′-diaminodiphenylmethane (DAM) (TU Mn). The degree of phase mixing between the hard and soft segments in TU Mn is more extensive than that in TM Mn, The specimen after immersing in lipids solution showed weight increase due to lipids sorption. The amount of increase in weight after lipid sorption was larger for TU Mn than for TM Mn. Also, the temperature dependences of dynamic viscoelasticity of the specimen after imersing in lipids solution revealed that disordered hard segments of TU Mn lost their aggregation strength after lipids sorption. The fatigue strength of TU Mn after lipids sorption decreased extensively and showed the formation of microcracks near fatigue fracture surface. This is attributed to the adsorbed lipid. However, TM Mn and Biomer did not show reduction of fatigue strength after lipids sorption. These results indicate that SPUU with disordered hard segments loses its fatigue strength in a biological environment.

UR - http://www.scopus.com/inward/record.url?scp=0022300119&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0022300119&partnerID=8YFLogxK

U2 - 10.1295/koron.42.793

DO - 10.1295/koron.42.793

M3 - Article

AN - SCOPUS:0022300119

VL - 42

SP - 793

EP - 801

JO - Kobunshi Ronbunshu

JF - Kobunshi Ronbunshu

SN - 0386-2186

IS - 11

ER -