Influence of mixing different types of powder on microstructure and sintering behavior of compacts

Kazunari Shinagawa, Kozo Yokota, Hiroshi Shirakawa, Hisakazu Tomino, Shunsuke Murai

研究成果: Contribution to journalArticle査読

抄録

Variations in microstructure and sintering behavior of metal/ceramic powder compacts with mixing ratio are examined by using alumina and stainless steel powder particles. Inhomogenous microstructure of the compacts can be observed as sharp separate peaks on the curve of pore size distribution. Mixture homogeneity of the compacts, which is estimated from the green density, increases with decreasing the volume fraction of strainless steel. Gaining the size of alumina powder also makes the mixture homogeneity large. Isolated stainless steel particles in homogenous micro structure do not bond together even in sintering process and may only inhibit the uniform densification of alumina powder. Although the alumina powder regions in the mixtures shrink locally, pores around the stainless steel particles are not eliminated, and may result in low density of sintered body.

本文言語英語
ページ(範囲)576-580
ページ数5
ジャーナルFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
52
8
DOI
出版ステータス出版済み - 8 1 2005
外部発表はい

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Metals and Alloys
  • Materials Chemistry

フィンガープリント 「Influence of mixing different types of powder on microstructure and sintering behavior of compacts」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル