抄録
In a computed radiography (CR) system, there are a number of different mechanisms that cause blurring. The aim of this study was to analyze intrinsic system factors of CR systems that could affect the modulation transfer function (MTF), such as afterglow during readout and the anti-alias filter before analog to digital converter. Methods and Materials: Mathematical slit and edge images were generated from analytical functions. These images were arranged perpendicularly to the laser scan and the plate scan directions, respectively. The influence of afterglow and the anti-alias filter was simulated by using Microsoft Excel. The MTF values calculated from those simulation images were compared with the theoretical MTF values obtained analytically. Results: MTF values in the laser scan direction measured with the slit and edge methods were significantly lower than MTF values in the plate scan direction. The degree of influence on MTF with respect to afterglow and the anti-alias filters was different depending on the measurement method and the scan directions of CR systems. The influence of the anti-alias filters mainly contributed to the differences between MTF values with the slit and edge methods in the laser scan direction.
本文言語 | 英語 |
---|---|
論文番号 | 113202 |
ジャーナル | Optical Engineering |
巻 | 51 |
号 | 11 |
DOI | |
出版ステータス | 出版済み - 11 1 2012 |
外部発表 | はい |
All Science Journal Classification (ASJC) codes
- Atomic and Molecular Physics, and Optics
- Engineering(all)