We evaluated the influence of texture information from remote sensed data on the accuracy of forest type classification at different spatial resolutions. We used 4-m spatial resolution imagery to create five different sets of imagery with lower spatial resolutions down to 30 m. We classified forest type using spectral information alone, texture information alone, and spectral and texture information combined at each spatial resolution, and compared the classification accuracy at each resolution. The classification and regression tree method was used for classification. The accuracy of all three tests decreased slightly with lower spatial resolution. The accuracy with the combined data was generally higher than with either the spectral or texture information alone. At most resolutions, the lowest accuracy was with texture information alone. However, there was no clear difference in accuracy between the combined data and spectral data alone at 25- and 30-m spatial resolution. These results indicate that adding texture information to spatial information improves the accuracy of forest type classification from very high resolution (4-m spatial resolution) to medium resolution imagery (20-m spatial resolution), but this accuracy improvement does not appear to hold for relatively coarse resolution imagery (25- to 30-m spatial resolution).
!!!All Science Journal Classification (ASJC) codes