Influences of Parameters on the Production Flow Rate of Geothermal Fluids

Michihiro Fukuda, Hiroyuki Kamenosono, Ryuichi Itoi, Satoshi Akibayashi

研究成果: Contribution to journalArticle査読

抄録

For a model of a lumped parameter reservoir combined with production wells, changes of production flow rates were calculated. From the results, followings can be said; 1. the flow rate steeply decreases just after the start of production until the reservoir reaches to the saturated condition, and then, 2. it keeps nearly constant for a while and abruptly declines in non-reinjection case, though it gradually decreases in the case of reinjecting low temperature water, and 3. if the fluid influx from heat source is large enough for the reservoir to keep unsaturated condition, it keeps constant for a long time, over 1 × 105 hours.

本文言語英語
ページ(範囲)31-43
ページ数13
ジャーナルjournal of the geothermal research society of japan
13
1
DOI
出版ステータス出版済み - 1991

All Science Journal Classification (ASJC) codes

  • Geophysics

フィンガープリント 「Influences of Parameters on the Production Flow Rate of Geothermal Fluids」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル