Influences of solute concentration on uniform elongation and dislocation characteristics of Al-Mg and Al-Si alloys

Yuki Koshino, Yasuhiro Aruga, Takuya Maeda, Kenji Kaneko

研究成果: ジャーナルへの寄稿記事

抄録

Influences of solute atoms and their contents on the uniform elongation were investigated using Al-Mg and Al-Si alloys respectively. Dislocation characteristics of both alloys were examined by X-ray diffractometry and transmission electron microscopy. In the case of solute concentration ranging between 0.3 and 1.6 (mass%), it was found that the increase of solute concentration caused the decrease of the uniform elongation for the case of Al-Mg alloys, whereas the increase of that for the case of Al-Si alloys. It was suggested that the solute Mg in aluminum caused a strong interaction on dislocation with comparison to the solute Si, which probably caused the large increase of dislocation density during the tensile deformation. It is considered that the solute Si has stronger effect of decreasing the stacking fault energy of the aluminum alloy than the solute Mg. Thus, as for Al-Si alloys, the increase of the work-hardenability and the uniform elongation may occur by retardation of the dynamic recovery during the tensile deformation.

元の言語英語
ページ(範囲)180-185
ページ数6
ジャーナルKeikinzoku/Journal of Japan Institute of Light Metals
69
発行部数3
DOI
出版物ステータス出版済み - 1 1 2019

Fingerprint

Elongation
Stacking faults
Aluminum
X ray diffraction analysis
Aluminum alloys
Transmission electron microscopy
Recovery
Atoms

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

これを引用

Influences of solute concentration on uniform elongation and dislocation characteristics of Al-Mg and Al-Si alloys. / Koshino, Yuki; Aruga, Yasuhiro; Maeda, Takuya; Kaneko, Kenji.

:: Keikinzoku/Journal of Japan Institute of Light Metals, 巻 69, 番号 3, 01.01.2019, p. 180-185.

研究成果: ジャーナルへの寄稿記事

@article{b7639cf4384b49f5920520f525a511b3,
title = "Influences of solute concentration on uniform elongation and dislocation characteristics of Al-Mg and Al-Si alloys",
abstract = "Influences of solute atoms and their contents on the uniform elongation were investigated using Al-Mg and Al-Si alloys respectively. Dislocation characteristics of both alloys were examined by X-ray diffractometry and transmission electron microscopy. In the case of solute concentration ranging between 0.3 and 1.6 (mass{\%}), it was found that the increase of solute concentration caused the decrease of the uniform elongation for the case of Al-Mg alloys, whereas the increase of that for the case of Al-Si alloys. It was suggested that the solute Mg in aluminum caused a strong interaction on dislocation with comparison to the solute Si, which probably caused the large increase of dislocation density during the tensile deformation. It is considered that the solute Si has stronger effect of decreasing the stacking fault energy of the aluminum alloy than the solute Mg. Thus, as for Al-Si alloys, the increase of the work-hardenability and the uniform elongation may occur by retardation of the dynamic recovery during the tensile deformation.",
author = "Yuki Koshino and Yasuhiro Aruga and Takuya Maeda and Kenji Kaneko",
year = "2019",
month = "1",
day = "1",
doi = "10.2464/jilm.69.180",
language = "English",
volume = "69",
pages = "180--185",
journal = "Keikinzoku/Journal of Japan Institute of Light Metals",
issn = "0451-5994",
publisher = "Keikinzoku Gakkai/Japan Institute of Light Metals",
number = "3",

}

TY - JOUR

T1 - Influences of solute concentration on uniform elongation and dislocation characteristics of Al-Mg and Al-Si alloys

AU - Koshino, Yuki

AU - Aruga, Yasuhiro

AU - Maeda, Takuya

AU - Kaneko, Kenji

PY - 2019/1/1

Y1 - 2019/1/1

N2 - Influences of solute atoms and their contents on the uniform elongation were investigated using Al-Mg and Al-Si alloys respectively. Dislocation characteristics of both alloys were examined by X-ray diffractometry and transmission electron microscopy. In the case of solute concentration ranging between 0.3 and 1.6 (mass%), it was found that the increase of solute concentration caused the decrease of the uniform elongation for the case of Al-Mg alloys, whereas the increase of that for the case of Al-Si alloys. It was suggested that the solute Mg in aluminum caused a strong interaction on dislocation with comparison to the solute Si, which probably caused the large increase of dislocation density during the tensile deformation. It is considered that the solute Si has stronger effect of decreasing the stacking fault energy of the aluminum alloy than the solute Mg. Thus, as for Al-Si alloys, the increase of the work-hardenability and the uniform elongation may occur by retardation of the dynamic recovery during the tensile deformation.

AB - Influences of solute atoms and their contents on the uniform elongation were investigated using Al-Mg and Al-Si alloys respectively. Dislocation characteristics of both alloys were examined by X-ray diffractometry and transmission electron microscopy. In the case of solute concentration ranging between 0.3 and 1.6 (mass%), it was found that the increase of solute concentration caused the decrease of the uniform elongation for the case of Al-Mg alloys, whereas the increase of that for the case of Al-Si alloys. It was suggested that the solute Mg in aluminum caused a strong interaction on dislocation with comparison to the solute Si, which probably caused the large increase of dislocation density during the tensile deformation. It is considered that the solute Si has stronger effect of decreasing the stacking fault energy of the aluminum alloy than the solute Mg. Thus, as for Al-Si alloys, the increase of the work-hardenability and the uniform elongation may occur by retardation of the dynamic recovery during the tensile deformation.

UR - http://www.scopus.com/inward/record.url?scp=85065340077&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85065340077&partnerID=8YFLogxK

U2 - 10.2464/jilm.69.180

DO - 10.2464/jilm.69.180

M3 - Article

VL - 69

SP - 180

EP - 185

JO - Keikinzoku/Journal of Japan Institute of Light Metals

JF - Keikinzoku/Journal of Japan Institute of Light Metals

SN - 0451-5994

IS - 3

ER -