Inputs and outputs of neural networks in identification of wear debris

Akihiko Umeda, Joichi Sugimura, Yuji Yamamoto

    研究成果: Contribution to journalArticle査読

    1 被引用数 (Scopus)

    抄録

    Artificial feedforward neural networks were used for identification of wear debris generated under various loads and at various sliding distances in pin-on-disk steel sliding experiments. Wear debris characteristics were described using four parameters, namely representative diameter, elongation, roundness and reflectivity, and the averages of these parameters were used as inputs to the networks. It was found that the percentage of correct identification depends on the size of the sample used for the averaging. Computer simulation of network learning was conducted using normally distributed random data for study of the effects of sample size. The results showed that the distance between the averages normalized by the standard deviation should be larger than 1.2 for successful identification, which corresponds to a sample size of 800 debris in the present experiments. For identification of continuous variables such as load and sliding distance, use of analog outputs from the networks was proposed, and was shown to work well if wear particle parameters changed monotonously with these variables.

    本文言語英語
    ページ(範囲)2839-2844
    ページ数6
    ジャーナルNippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
    63
    612
    DOI
    出版ステータス出版済み - 1997

    All Science Journal Classification (ASJC) codes

    • 材料力学
    • 機械工学
    • 産業および生産工学

    フィンガープリント

    「Inputs and outputs of neural networks in identification of wear debris」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル