Latest design of liquid lithium target in IFMIF

H. Nakamura; P. Agostini; K. Ara; S. Cevolani; T. Chida; M. Ciotti; S. Fukada; K. Furuya; P. Garin; A. Gessii; D. Guisti; V. Heinzel; H. Horiike; M. Ida; S. Jitsukawa; T. Kanemura; H. Kondo; Y. Kukita; R. Lösser; H. Matsui; G. Micciche; M. Miyashita; T. Muroga; B. Riccardi; S. Simakov; R. Stieglitz; M. Sugimoto; A. Suzuki; S. Tanaka; T. Terai; J. Yagi; E. Yoshida; E. Wakai

doi:10.1016/j.fusengdes.2008.06.014

Latest design of liquid lithium target in IFMIF

H. Nakamura, P. Agostini, K. Ara, S. Cevolani, T. Chida, M. Ciotti, S. Fukada, K. Furuya, P. Garin, A. Gessii, D. Guisti, V. Heinzel, H. Horiike, M. Ida, S. Jitsukawa, T. Kanemura, H. Kondo, Y. Kukita, R. Lösser, H. MatsuiG. Micciche, M. Miyashita, T. Muroga, B. Riccardi, S. Simakov, R. Stieglitz, M. Sugimoto, A. Suzuki, S. Tanaka, T. Terai, J. Yagi, E. Yoshida, E. Wakai

エネルギーシステム学

研究成果: Contribution to journal › Article › 査読

19 被引用数 (Scopus)

抄録

This paper describes the latest design of liquid lithium (Li) target system in International Fusion Materials Irradiation Facility (IFMIF). IFMIF is an accelerator-driven intense neutron source for fusion reactor materials testing. Two 40 MeV deuteron beams with a total current of 250 mA strikes a liquid Li target circulating in a Li loop. The Li target is to provide a stable Li jet at a speed of 10-20 m/s to handle an averaged heat flux of 1 GW/m². A concaved Li flow is applied to avoid Li boiling. A cold trap and two kinds of hot trap are applied to control impurities (T, ⁷Be, C, O, N) below permissible levels. A back wall made of RAFM is located in the most severe region of neutron irradiation (50 dpa/year). System availability requires more than 95% during plant lifetime. EVEDA tasks including Li loop are now being performed under the Broader Approach.

本文言語	英語
ページ（範囲）	1007-1014
ページ数	8
ジャーナル	Fusion Engineering and Design
巻	83
号	7-9
DOI	https://doi.org/10.1016/j.fusengdes.2008.06.014
出版ステータス	出版済み - 12 2008

All Science Journal Classification (ASJC) codes

Civil and Structural Engineering
Nuclear Energy and Engineering
Materials Science(all)
Mechanical Engineering

文献へのアクセス

10.1016/j.fusengdes.2008.06.014

フィンガープリント「Latest design of liquid lithium target in IFMIF」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル

Nakamura, H., Agostini, P., Ara, K., Cevolani, S., Chida, T., Ciotti, M., Fukada, S., Furuya, K., Garin, P., Gessii, A., Guisti, D., Heinzel, V., Horiike, H., Ida, M., Jitsukawa, S., Kanemura, T., Kondo, H., Kukita, Y., Lösser, R., ... Wakai, E. (2008). Latest design of liquid lithium target in IFMIF. Fusion Engineering and Design, 83(7-9), 1007-1014. https://doi.org/10.1016/j.fusengdes.2008.06.014

Latest design of liquid lithium target in IFMIF. / Nakamura, H.; Agostini, P.; Ara, K.; Cevolani, S.; Chida, T.; Ciotti, M.; Fukada, S.; Furuya, K.; Garin, P.; Gessii, A.; Guisti, D.; Heinzel, V.; Horiike, H.; Ida, M.; Jitsukawa, S.; Kanemura, T.; Kondo, H.; Kukita, Y.; Lösser, R.; Matsui, H.; Micciche, G.; Miyashita, M.; Muroga, T.; Riccardi, B.; Simakov, S.; Stieglitz, R.; Sugimoto, M.; Suzuki, A.; Tanaka, S.; Terai, T.; Yagi, J.; Yoshida, E.; Wakai, E.

In: Fusion Engineering and Design, Vol. 83, No. 7-9, 12.2008, p. 1007-1014.

研究成果: Contribution to journal › Article › 査読

Nakamura, H, Agostini, P, Ara, K, Cevolani, S, Chida, T, Ciotti, M, Fukada, S, Furuya, K, Garin, P, Gessii, A, Guisti, D, Heinzel, V, Horiike, H, Ida, M, Jitsukawa, S, Kanemura, T, Kondo, H, Kukita, Y, Lösser, R, Matsui, H, Micciche, G, Miyashita, M, Muroga, T, Riccardi, B, Simakov, S, Stieglitz, R, Sugimoto, M, Suzuki, A, Tanaka, S, Terai, T, Yagi, J, Yoshida, E & Wakai, E 2008, 'Latest design of liquid lithium target in IFMIF', Fusion Engineering and Design, vol. 83, no. 7-9, pp. 1007-1014. https://doi.org/10.1016/j.fusengdes.2008.06.014

Nakamura, H. ; Agostini, P. ; Ara, K. ; Cevolani, S. ; Chida, T. ; Ciotti, M. ; Fukada, S. ; Furuya, K. ; Garin, P. ; Gessii, A. ; Guisti, D. ; Heinzel, V. ; Horiike, H. ; Ida, M. ; Jitsukawa, S. ; Kanemura, T. ; Kondo, H. ; Kukita, Y. ; Lösser, R. ; Matsui, H. ; Micciche, G. ; Miyashita, M. ; Muroga, T. ; Riccardi, B. ; Simakov, S. ; Stieglitz, R. ; Sugimoto, M. ; Suzuki, A. ; Tanaka, S. ; Terai, T. ; Yagi, J. ; Yoshida, E. ; Wakai, E. / Latest design of liquid lithium target in IFMIF. In: Fusion Engineering and Design. 2008 ; Vol. 83, No. 7-9. pp. 1007-1014.

@article{b32599b8da9943ec865aca98c277fb78,

title = "Latest design of liquid lithium target in IFMIF",

abstract = "This paper describes the latest design of liquid lithium (Li) target system in International Fusion Materials Irradiation Facility (IFMIF). IFMIF is an accelerator-driven intense neutron source for fusion reactor materials testing. Two 40 MeV deuteron beams with a total current of 250 mA strikes a liquid Li target circulating in a Li loop. The Li target is to provide a stable Li jet at a speed of 10-20 m/s to handle an averaged heat flux of 1 GW/m2. A concaved Li flow is applied to avoid Li boiling. A cold trap and two kinds of hot trap are applied to control impurities (T, 7Be, C, O, N) below permissible levels. A back wall made of RAFM is located in the most severe region of neutron irradiation (50 dpa/year). System availability requires more than 95% during plant lifetime. EVEDA tasks including Li loop are now being performed under the Broader Approach.",

author = "H. Nakamura and P. Agostini and K. Ara and S. Cevolani and T. Chida and M. Ciotti and S. Fukada and K. Furuya and P. Garin and A. Gessii and D. Guisti and V. Heinzel and H. Horiike and M. Ida and S. Jitsukawa and T. Kanemura and H. Kondo and Y. Kukita and R. L{\"o}sser and H. Matsui and G. Micciche and M. Miyashita and T. Muroga and B. Riccardi and S. Simakov and R. Stieglitz and M. Sugimoto and A. Suzuki and S. Tanaka and T. Terai and J. Yagi and E. Yoshida and E. Wakai",

year = "2008",

month = dec,

doi = "10.1016/j.fusengdes.2008.06.014",

language = "English",

volume = "83",

pages = "1007--1014",

journal = "Fusion Engineering and Design",

issn = "0920-3796",

publisher = "Elsevier BV",

number = "7-9",

}

TY - JOUR

T1 - Latest design of liquid lithium target in IFMIF

AU - Nakamura, H.

AU - Agostini, P.

AU - Ara, K.

AU - Cevolani, S.

AU - Chida, T.

AU - Ciotti, M.

AU - Fukada, S.

AU - Furuya, K.

AU - Garin, P.

AU - Gessii, A.

AU - Guisti, D.

AU - Heinzel, V.

AU - Horiike, H.

AU - Ida, M.

AU - Jitsukawa, S.

AU - Kanemura, T.

AU - Kondo, H.

AU - Kukita, Y.

AU - Lösser, R.

AU - Matsui, H.

AU - Micciche, G.

AU - Miyashita, M.

AU - Muroga, T.

AU - Riccardi, B.

AU - Simakov, S.

AU - Stieglitz, R.

AU - Sugimoto, M.

AU - Suzuki, A.

AU - Tanaka, S.

AU - Terai, T.

AU - Yagi, J.

AU - Yoshida, E.

AU - Wakai, E.

PY - 2008/12

Y1 - 2008/12

N2 - This paper describes the latest design of liquid lithium (Li) target system in International Fusion Materials Irradiation Facility (IFMIF). IFMIF is an accelerator-driven intense neutron source for fusion reactor materials testing. Two 40 MeV deuteron beams with a total current of 250 mA strikes a liquid Li target circulating in a Li loop. The Li target is to provide a stable Li jet at a speed of 10-20 m/s to handle an averaged heat flux of 1 GW/m2. A concaved Li flow is applied to avoid Li boiling. A cold trap and two kinds of hot trap are applied to control impurities (T, 7Be, C, O, N) below permissible levels. A back wall made of RAFM is located in the most severe region of neutron irradiation (50 dpa/year). System availability requires more than 95% during plant lifetime. EVEDA tasks including Li loop are now being performed under the Broader Approach.

AB - This paper describes the latest design of liquid lithium (Li) target system in International Fusion Materials Irradiation Facility (IFMIF). IFMIF is an accelerator-driven intense neutron source for fusion reactor materials testing. Two 40 MeV deuteron beams with a total current of 250 mA strikes a liquid Li target circulating in a Li loop. The Li target is to provide a stable Li jet at a speed of 10-20 m/s to handle an averaged heat flux of 1 GW/m2. A concaved Li flow is applied to avoid Li boiling. A cold trap and two kinds of hot trap are applied to control impurities (T, 7Be, C, O, N) below permissible levels. A back wall made of RAFM is located in the most severe region of neutron irradiation (50 dpa/year). System availability requires more than 95% during plant lifetime. EVEDA tasks including Li loop are now being performed under the Broader Approach.

UR - http://www.scopus.com/inward/record.url?scp=56949101781&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=56949101781&partnerID=8YFLogxK

U2 - 10.1016/j.fusengdes.2008.06.014

DO - 10.1016/j.fusengdes.2008.06.014

M3 - Article

AN - SCOPUS:56949101781

VL - 83

SP - 1007

EP - 1014

JO - Fusion Engineering and Design

JF - Fusion Engineering and Design

SN - 0920-3796

IS - 7-9

ER -