Low wavelength dependency design for MMI (multi-mode interference) mode converter

Yutaka Chaen, Kazuhiro Tanabe, Haisong Jiang, Kiichi Hamamoto

研究成果: ジャーナルへの寄稿レター

1 引用 (Scopus)

抄録

Mode-division multiplexing (MDM) is widely researched, and we are researching mode converter by using multi-mode interference (MMI) waveguide. Wavelength division multiplexing (WDM) must be used in addition to the MDM, however, wavelength dependency exits for MMI in general as it works based on the interference of light. In this paper, we analyze the wavelength dependency of the MMI 0th to 1st mode-converter theoretically. As a result, we clarify the design scheme to suppress the wavelength dependency. Moreover, we show the sufficient performance of less than 1.0 dB in entire C-band for highly confined waveguide (Si/SiO2 waveguide) as a design example.

元の言語英語
記事番号A07
ジャーナルIEICE Electronics Express
12
発行部数20
DOI
出版物ステータス出版済み - 10 8 2015

Fingerprint

converters
Waveguides
Wavelength division multiplexing
interference
Wavelength
wavelengths
Multiplexing
wavelength division multiplexing
waveguides
C band
multiplexing
division

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

これを引用

Low wavelength dependency design for MMI (multi-mode interference) mode converter. / Chaen, Yutaka; Tanabe, Kazuhiro; Jiang, Haisong; Hamamoto, Kiichi.

:: IEICE Electronics Express, 巻 12, 番号 20, A07, 08.10.2015.

研究成果: ジャーナルへの寄稿レター

@article{698cc2b1180548c8be4075b58a5c72c5,
title = "Low wavelength dependency design for MMI (multi-mode interference) mode converter",
abstract = "Mode-division multiplexing (MDM) is widely researched, and we are researching mode converter by using multi-mode interference (MMI) waveguide. Wavelength division multiplexing (WDM) must be used in addition to the MDM, however, wavelength dependency exits for MMI in general as it works based on the interference of light. In this paper, we analyze the wavelength dependency of the MMI 0th to 1st mode-converter theoretically. As a result, we clarify the design scheme to suppress the wavelength dependency. Moreover, we show the sufficient performance of less than 1.0 dB in entire C-band for highly confined waveguide (Si/SiO2 waveguide) as a design example.",
author = "Yutaka Chaen and Kazuhiro Tanabe and Haisong Jiang and Kiichi Hamamoto",
year = "2015",
month = "10",
day = "8",
doi = "10.1587/elex.12.20150727",
language = "English",
volume = "12",
journal = "IEICE Electronics Express",
issn = "1349-2543",
publisher = "The Institute of Electronics, Information and Communication Engineers (IEICE)",
number = "20",

}

TY - JOUR

T1 - Low wavelength dependency design for MMI (multi-mode interference) mode converter

AU - Chaen, Yutaka

AU - Tanabe, Kazuhiro

AU - Jiang, Haisong

AU - Hamamoto, Kiichi

PY - 2015/10/8

Y1 - 2015/10/8

N2 - Mode-division multiplexing (MDM) is widely researched, and we are researching mode converter by using multi-mode interference (MMI) waveguide. Wavelength division multiplexing (WDM) must be used in addition to the MDM, however, wavelength dependency exits for MMI in general as it works based on the interference of light. In this paper, we analyze the wavelength dependency of the MMI 0th to 1st mode-converter theoretically. As a result, we clarify the design scheme to suppress the wavelength dependency. Moreover, we show the sufficient performance of less than 1.0 dB in entire C-band for highly confined waveguide (Si/SiO2 waveguide) as a design example.

AB - Mode-division multiplexing (MDM) is widely researched, and we are researching mode converter by using multi-mode interference (MMI) waveguide. Wavelength division multiplexing (WDM) must be used in addition to the MDM, however, wavelength dependency exits for MMI in general as it works based on the interference of light. In this paper, we analyze the wavelength dependency of the MMI 0th to 1st mode-converter theoretically. As a result, we clarify the design scheme to suppress the wavelength dependency. Moreover, we show the sufficient performance of less than 1.0 dB in entire C-band for highly confined waveguide (Si/SiO2 waveguide) as a design example.

UR - http://www.scopus.com/inward/record.url?scp=84945262256&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84945262256&partnerID=8YFLogxK

U2 - 10.1587/elex.12.20150727

DO - 10.1587/elex.12.20150727

M3 - Letter

VL - 12

JO - IEICE Electronics Express

JF - IEICE Electronics Express

SN - 1349-2543

IS - 20

M1 - A07

ER -