Machinability improvement and its mechanism in SUS304 austenitic stainless steel by precipitated hexagonal boron nitride

Satoshi Emura, Masahiro Kawajiri, Xiaohua Min, Shigeo Yamamoto, Kazuyuki Sakuraya, Kaneaki Tsuzaki

研究成果: Contribution to journalArticle

4 引用 (Scopus)

抜粋

To improve the machinability of SUS304 (Type 304) austenitic stainless steels, specimens were prepared containing 0.016 mass% boron and 0.2 mass% nitrogen, and hexagonal boron nitride (h-BN) particles with a diameter of 1 to 5 ì m were precipitated. Precipitation of h-BN reduced the cutting force and tool wear during lathe turning with a cemented carbide tool insert, especially at cutting speeds of 40 m/min and higher. The reduction in cutting force appeared attributable to internal lubrication by h-BN in the chip shear region and the deformation flow layer, as well as to lubrication between the chip and carbide tool. Improved chip disposability and tool wear suppression were also achieved by h-BN precipitation. SUS304 steel with precipitated h-BN was found to exhibit good machinability in drilling and sawing operations with high-speed steel tools.

元の言語英語
ページ(範囲)1841-1849
ページ数9
ジャーナルisij international
53
発行部数10
DOI
出版物ステータス出版済み - 11 18 2013
外部発表Yes

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

フィンガープリント Machinability improvement and its mechanism in SUS304 austenitic stainless steel by precipitated hexagonal boron nitride' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用