Macroscale Superlubricity of Multilayer Polyethylenimine/Graphene Oxide Coatings in Different Gas Environments

研究成果: Contribution to journalArticle査読

33 被引用数 (Scopus)

抄録

Friction and wear decrease the efficiency and lifetimes of mechanical devices. Solving this problem will potentially lead to a significant reduction in global energy consumption. We show that multilayer polyethylenimine/graphene oxide thin films, prepared via a highly scalable layer-by-layer (LbL) deposition technique, can be used as solid lubricants. The tribological properties are investigated in air, under vacuum, in hydrogen, and in nitrogen gas environments. In all cases the coefficient of friction (COF) significantly decreased after application of the coating, and the wear life was enhanced by increasing the film thickness. The COF was lower in dry environments than in more humid environments, in contrast to traditional graphite and diamond-like carbon films. Superlubricity (COF < 0.01) was achieved for the thickest films in dry N2. Microstructural analysis of the wear debris revealed that carbon nanoparticles were formed exclusively in dry conditions (i.e., N2, vacuum), and it is postulated that these act as rolling asperities, decreasing the contact area and the COF. Density functional theory (DFT) simulations were performed on graphene oxide sheets under pressure, showing that strong hydrogen bonding occurs in the presence of intercalated water molecules compared with weak repulsion in the absence of water. It is suggested that this mechanism prevents the separation graphene oxide layers and subsequent formation of nanostructures in humid conditions.

本文言語英語
ページ(範囲)27179-27187
ページ数9
ジャーナルACS Applied Materials and Interfaces
8
40
DOI
出版ステータス出版済み - 10 12 2016

All Science Journal Classification (ASJC) codes

  • 材料科学(全般)

フィンガープリント

「Macroscale Superlubricity of Multilayer Polyethylenimine/Graphene Oxide Coatings in Different Gas Environments」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル