Magnetic-shield type superconducting fault current limiter with high Tc superconductors

Kazuhiro Kajikawa, Katsuyuki Kaiho, Noriharu Tamada, Toshitada Onishi

研究成果: ジャーナルへの寄稿学術誌査読

2 被引用数 (Scopus)

抄録

The continuous development of electric power utilities has led to the increase in the problems concerning fault currents. The use of fault current limiters, which suppress fault currents below a certain level, has been examined in many places. The authors have studied a superconducting fault current limiter that is based on the magnetic shielding characteristics of superconductors. In this paper, three kinds of fault current limiters with high Tc superconductors and their results tested at liquid nitrogen temperature are presented. The experimental results show that the impedances of limiters in the fault condition became higher than those in the normal condition but were lower than the anticipated ones. Next, a numerical calculation model to analyze the experimental results is presented. The calculation results with this model agreed with the above experimental ones very well. From these studies it is concluded that it is necessary for the sudden transition from the superconducting state to the fully resistive state to be caused by the suitable means.

本文言語英語
ページ(範囲)1026-1031
ページ数6
ジャーナルIEEJ Transactions on Industry Applications
114
10
DOI
出版ステータス出版済み - 1994
外部発表はい

!!!All Science Journal Classification (ASJC) codes

  • 産業および生産工学
  • 電子工学および電気工学

フィンガープリント

「Magnetic-shield type superconducting fault current limiter with high Tc superconductors」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル