This paper presents a scheme for combining a Langmuir probe with a fast camera for measurement of the behavior of blob-like structures in the boundary region of an electron cyclotron resonance (ECR) heating plasma in Q-shu University Experiment with a Steady-State Spherical Tokamak (QUEST, major radius, R = 0.68 m, minor radius, a = 0.40 m, and toroidal magnetic field, Bt = 0.25T at R = 0.64 m). The frame rate of the camera was typically set to 40,000 frames per second (FPS) with 192 ×144 pixels per frame. Radial motion of blob-like structures was observed in the half of the plasma space where the probe head was located. A radially movable and rotatable probe system was used to measure the floating potential from single unbiased tips, the potential of the positively biased tip, and the ion saturation current in two orthogonal directions in the outboard midplane region. Time series of the ion saturation current measured by the Langmuir probe and of pixels in a 40,000 FPS movie were compared and cross-correlated. The results of the two diagnostics agreed well, and the spatial scale was found to be of the same as the size of the probe head. The ion saturation current was asymmetric in terms of the time the blob-like structure was passing; fast camera imaging also clearly demonstrated the blobs' filamentary structures and radial motion at the edge of QUEST. This means that plasma in the blob-like structure hunches over, like blobs in other devices. The typical radial velocity of the structures is ~1km/s, and the structures were accelerated along their path of radial motion from the inner to the outer parts of the vacuum vessel.
!!!All Science Journal Classification (ASJC) codes