Measurement of mode II threshold stress intensity factor range ΔKIIth

Yukitaka Murakami, Taketo Fukuhara, Shigeru Hamada

研究成果: Contribution to journalArticle査読

28 被引用数 (Scopus)

抄録

In order to measure the Mode II fatigue crack growth resistance of various materials, a particular chevron notched double-cantilever type specimen with side grooves was designed. Mode II fatigue crack growth tests by using the newly designed specimens were conducted by a conventional closed-loop type tension-compression fatigue testing machine under a constant load amplitude which corresponds to the ΔKII-decreasing test with increase in crack length. The crack length was measured by the AC potential method. The particular morphology of Mode II crack fracture surface was investigated. The distribution of shear stress in crack tip and Mode II stress intensity factor were analyzed using a FEM software, ABAQUS. The relationships between Mode II crack growth rate (da/dN) and ΔKII for various materials were obtained, and the values of ΔKIIth were determined. It was found that ΔKIIth is larger than ΔKIIth for all materials tested in this study.

本文言語英語
ページ(範囲)918-925
ページ数8
ジャーナルZairyo/Journal of the Society of Materials Science, Japan
51
8
DOI
出版ステータス出版済み - 8 2002

All Science Journal Classification (ASJC) codes

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Measurement of mode II threshold stress intensity factor range ΔK<sub>IIth</sub>」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル