Measurement of thickness of film deposited on the plasma-facing wall in the QUEST tokamak by colorimetry

Z. Wang, K. Hanada, N. Yoshida, T. Shimoji, M. Miyamoto, Y. Oya, H. Zushi, H. Idei, K. Nakamura, A. Fujisawa, Y. Nagashima, M. Hasegawa, S. Kawasaki, A. Higashijima, H. Nakashima, T. Nagata, A. Kawaguchi, T. Fujiwara, K. Araki, O. MitaraiA. Fukuyama, Y. Takase, K. Matsumoto

研究成果: ジャーナルへの寄稿学術誌査読

7 被引用数 (Scopus)

抄録

After several experimental campaigns in the Kyushu University Experiment with Steady-state Spherical Tokamak (QUEST), the originally stainless steel plasma-facing wall (PFW) becomes completely covered with a deposited film composed of mixture materials, such as iron, chromium, carbon, and tungsten. In this work, an innovative colorimetry-based method was developed to measure the thickness of the deposited film on the actual QUEST wall. Because the optical constants of the deposited film on the PFW were position-dependent and the extinction coefficient k1 was about 1.0-2.0, which made the probing light not penetrate through some thick deposited films, the colorimetry method developed can only provide a rough value range of thickness of the metal-containing film deposited on the actual PFW in QUEST. However, the use of colorimetry is of great benefit to large-area inspections and to radioactive materials in future fusion devices that will be strictly prohibited from being taken out of the limited area.

本文言語英語
論文番号093502
ジャーナルReview of Scientific Instruments
88
9
DOI
出版ステータス出版済み - 9月 1 2017

!!!All Science Journal Classification (ASJC) codes

  • 器械工学

フィンガープリント

「Measurement of thickness of film deposited on the plasma-facing wall in the QUEST tokamak by colorimetry」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル