Measurements of the surface tension for R290, R600a and R290/R600a mixture

Katsuyuki Tanaka, Yukihiro Higashi

研究成果: ジャーナルへの寄稿学術誌査読

28 被引用数 (Scopus)

抄録

The surface tensions of R290, R600a and R290/R600a mixture have been measured by the modified differential capillary-rise method. Twenty-two data points for R290 and 21 data points for R600a were obtained in the temperature range between 273 K and 354 K, and 43 data points for R290/R600a mixture on three isotherms of 278 K, 300 K and 320 K were obtained. The experimental uncertainties of temperature and surface tension are estimated to be within 20 mK and 0.2 mN m-1, respectively. Surface tension correlations as a function of temperature for pure R290 and R600a were formulated in the temperature range between 253 K and critical temperature, and the correlation as a function of the composition for R290/R600a mixture was discussed at 278 K, 300 K and 320 K. It is found that the surface tension for R290/R600a mixture can be reproduced by the simple mixing rule by mole fraction with the correlations of both pure components.

本文言語英語
ページ(範囲)1368-1373
ページ数6
ジャーナルInternational Journal of Refrigeration
30
8
DOI
出版ステータス出版済み - 12月 1 2007
外部発表はい

!!!All Science Journal Classification (ASJC) codes

  • 建築および建設
  • 機械工学

フィンガープリント

「Measurements of the surface tension for R290, R600a and R290/R600a mixture」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル