Mechanical properties and cyto-toxicity of new beta type titanium alloy with low melting points for dental applications

Mitsuo Niinomi, Toshikazu Akahori, Tsutomu Takeuchi, Shigeki Katsura, Hisao Fukui, Hiroyuki Toda

研究成果: ジャーナルへの寄稿会議記事査読

51 被引用数 (Scopus)

抄録

Beta stabilized new alloys such as Ti-29Nb-13Zr-2Cr, Ti-29Nb-15Zr-1.5Fe, Ti-29Nb-10Zr-0.5Si, Ti-29Nb-10Zr-0.5Cr-0.5Fe and Ti-29Nb-18Zr-2Cr-0.5Si have been developed for dental applications. These alloys were designed based on master alloy Ti-29Nb-13Ta-4.6Zr (TNTZ) for biomedical applications. In this research, high melting temperature element Ta was replaced with beta stabilizing elements such as Cr, Fe and Si to lower the melting temperature of the alloy. Their melting points, mechanical properties, surface reaction layers and cyto-toxicity were investigated in this study. Melting points of designed alloys fall by about 50 K to 370 K as compared with that of TNTZ, and Ti-29Nb-13Zr-2Cr has the lowest melting point of around 2050 K. Vickers hardness of the surface of each designed alloy cast into modified magnesia based investment material is in the range of 400 Hv to 500 Hv, which is lower than that of TNTZ (around 560 Hv). Balances of strength and ductility of cast Ti-29Nb-13Zr-2Cr, Ti-29Nb-15Zr-1.5Fe and Ti-29Nb-10Zr-0.5Cr-0.5Fe are nearly equal to that of cast TNTZ. Cell viability of each cast designed alloy is excellent.

本文言語英語
ページ(範囲)417-425
ページ数9
ジャーナルMaterials Science and Engineering C
25
3
DOI
出版ステータス出版済み - 5月 1 2005
外部発表はい
イベントSelected Papers Presented at the Materials Science and Technology 2004 Meeting: Titanium for Biomedical, Dental, and Healthcare -
継続期間: 9月 26 20049月 29 2004

!!!All Science Journal Classification (ASJC) codes

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Mechanical properties and cyto-toxicity of new beta type titanium alloy with low melting points for dental applications」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル