Mechanical properties of bulk nanocrystalline aluminum-tungsten alloys

K. V. Rajulapati; R. O. Scattergood; K. L. Murty; Z. Horita; T. G. Langdon; C. C. Koch

doi:10.1007/s11661-008-9593-3

Mechanical properties of bulk nanocrystalline aluminum-tungsten alloys

K. V. Rajulapati, R. O. Scattergood, K. L. Murty, Z. Horita, T. G. Langdon, C. C. Koch

研究成果: ジャーナルへの寄稿 › 学術誌 › 査読

35 被引用数 (Scopus)

抄録

The Al-W alloy powders containing up to 4 at. pct W particles in a nanocrystalline Al matrix were synthesized by ball milling and then hot compacted (HC) at 573 K or cold compacted using high-pressure torsion (HPT). Hardness measurements were made to determine the effects on mechanical properties. Based on existing models, the hardening effect of W particles in HC samples was attributed to Orowan-particle strengthening. Composite-type strengthening due to large W particles appeared to be negligible. Both the compressive strain and shear strain in high pressure torsion added to the strengthening effects without producing a change in the grain size.

本文言語	英語
ページ（範囲）	2528-2534
ページ数	7
ジャーナル	Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
巻	39
号	10
DOI	https://doi.org/10.1007/s11661-008-9593-3
出版ステータス	出版済み - 10月 2008

!!!All Science Journal Classification (ASJC) codes

凝縮系物理学
材料力学
金属および合金

文献へのアクセス

10.1007/s11661-008-9593-3

他のファイルとリンク

引用スタイル

@article{dc6bd792b29e4a1ea77296f5e7d90c4d,

title = "Mechanical properties of bulk nanocrystalline aluminum-tungsten alloys",

abstract = "The Al-W alloy powders containing up to 4 at. pct W particles in a nanocrystalline Al matrix were synthesized by ball milling and then hot compacted (HC) at 573 K or cold compacted using high-pressure torsion (HPT). Hardness measurements were made to determine the effects on mechanical properties. Based on existing models, the hardening effect of W particles in HC samples was attributed to Orowan-particle strengthening. Composite-type strengthening due to large W particles appeared to be negligible. Both the compressive strain and shear strain in high pressure torsion added to the strengthening effects without producing a change in the grain size.",

author = "Rajulapati, {K. V.} and Scattergood, {R. O.} and Murty, {K. L.} and Z. Horita and Langdon, {T. G.} and Koch, {C. C.}",

note = "Funding Information: This research was supported by the United States National Science Foundation under Grant No. DMR-0201474. This work is also supported, in part, by a Grant-in-Aid for Scientific Research on Priority Areas, from the Ministry of Education, Culture, Sports, Science and Technology, Japan.",

year = "2008",

month = oct,

doi = "10.1007/s11661-008-9593-3",

language = "English",

volume = "39",

pages = "2528--2534",

journal = "Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science",

issn = "1073-5623",

publisher = "Springer Boston",

number = "10",

}

TY - JOUR

T1 - Mechanical properties of bulk nanocrystalline aluminum-tungsten alloys

AU - Rajulapati, K. V.

AU - Scattergood, R. O.

AU - Murty, K. L.

AU - Horita, Z.

AU - Langdon, T. G.

AU - Koch, C. C.

N1 - Funding Information: This research was supported by the United States National Science Foundation under Grant No. DMR-0201474. This work is also supported, in part, by a Grant-in-Aid for Scientific Research on Priority Areas, from the Ministry of Education, Culture, Sports, Science and Technology, Japan.

PY - 2008/10

Y1 - 2008/10

N2 - The Al-W alloy powders containing up to 4 at. pct W particles in a nanocrystalline Al matrix were synthesized by ball milling and then hot compacted (HC) at 573 K or cold compacted using high-pressure torsion (HPT). Hardness measurements were made to determine the effects on mechanical properties. Based on existing models, the hardening effect of W particles in HC samples was attributed to Orowan-particle strengthening. Composite-type strengthening due to large W particles appeared to be negligible. Both the compressive strain and shear strain in high pressure torsion added to the strengthening effects without producing a change in the grain size.

AB - The Al-W alloy powders containing up to 4 at. pct W particles in a nanocrystalline Al matrix were synthesized by ball milling and then hot compacted (HC) at 573 K or cold compacted using high-pressure torsion (HPT). Hardness measurements were made to determine the effects on mechanical properties. Based on existing models, the hardening effect of W particles in HC samples was attributed to Orowan-particle strengthening. Composite-type strengthening due to large W particles appeared to be negligible. Both the compressive strain and shear strain in high pressure torsion added to the strengthening effects without producing a change in the grain size.

UR - http://www.scopus.com/inward/record.url?scp=50349097698&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=50349097698&partnerID=8YFLogxK

U2 - 10.1007/s11661-008-9593-3

DO - 10.1007/s11661-008-9593-3

M3 - Article

AN - SCOPUS:50349097698

VL - 39

SP - 2528

EP - 2534

JO - Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

JF - Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

SN - 1073-5623

IS - 10

ER -

Mechanical properties of bulk nanocrystalline aluminum-tungsten alloys

抄録

!!!All Science Journal Classification (ASJC) codes

文献へのアクセス

他のファイルとリンク

フィンガープリント

引用スタイル