Mechano-active scaffold design of small-diameter artificial graft made of electrospun segmented polyurethane fabrics

Takehisa Matsuda, Maki Ihara, Hiroyuki Inoguchi, Il Keun Kwon, Keiichi Takamizawa, Satoru Kidoaki

研究成果: ジャーナルへの寄稿学術誌査読

64 被引用数 (Scopus)

抄録

To fabricate a "mechano-active" tubular scaffold of nonwoven mesh-type small-diameter artificial graft made of the synthetic durable elastomer, segmented polyurethane, the fabrication technique of electrospinning on a mandrel under a high rotation speed and transverse movement was used. Emphasis was placed on how the rotation speed of the mandrel and the fusion or welding states of fibers at contact points affect the compliance (ease of intraluminal pressure-dependent circumferential inflation) and Young's modulus determined by uniaxial stretching in the longitudinal and circumferential directions. The results showed that a high rotation speed is attributed to exhibit isotropic mechanical properties in the entire range of applied strain but reduces the compliance, and a high fusion state, which is produced using a mixed solvent with a high content of high-boiling-point solvent, reduces the compliance but is expected to exhibit high durability in a continuously loaded pulsatile stress field in an arterial circulatory system.

本文言語英語
ページ(範囲)125-131
ページ数7
ジャーナルJournal of Biomedical Materials Research - Part A
73
1
DOI
出版ステータス出版済み - 4月 1 2005

!!!All Science Journal Classification (ASJC) codes

  • セラミックおよび複合材料
  • 生体材料
  • 生体医工学
  • 金属および合金

フィンガープリント

「Mechano-active scaffold design of small-diameter artificial graft made of electrospun segmented polyurethane fabrics」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル