Micro metal injection molding process for high performance titanium alloy

Hideshi Miura, Toshiko Osada, Shigeo Tanaka, Makoto Uemura

研究成果: 著書/レポートタイプへの貢献会議での発言

2 引用 (Scopus)

抄録

In this study, gas nitriding was processed for various sizes of Ti specimens which were produced by metal injection molding (MIM) process, for the sake of enabling the high functionality at low processing cost. It was shown by the nitriding treatment that the hardness of the surface increased extremely and the microstructure changed to the TiN and acicular α-Ti phase. With respect to the effect of the nitriding on the size of parts, micro dumbbell specimen had around five times higher content of nitrogen than the block ones. It was suggested that the size of μ-MIM products is so small that the surface treatment can contribute significantly to improve the properties, and then gas nitriding process may be one of effective surface treatment methods for high functionality of μ-MIM Ti products.

元の言語英語
ホスト出版物のタイトルSupplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006
ページ3667-3672
ページ数6
エディションPART 4
出版物ステータス出版済み - 12 1 2007
イベント5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006 - Vancouver, カナダ
継続期間: 7 4 20067 8 2006

出版物シリーズ

名前Materials Science Forum
番号PART 4
539-543
ISSN(印刷物)0255-5476

その他

その他5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006
カナダ
Vancouver
期間7/4/067/8/06

Fingerprint

Metal molding
injection molding
nitriding
Nitriding
titanium alloys
Titanium alloys
Injection molding
surface treatment
metals
Surface treatment
Gases
products
gases
Nitrogen
hardness
Hardness
costs
nitrogen
microstructure
Microstructure

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

これを引用

Miura, H., Osada, T., Tanaka, S., & Uemura, M. (2007). Micro metal injection molding process for high performance titanium alloy. : Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006 (PART 4 版, pp. 3667-3672). (Materials Science Forum; 巻数 539-543, 番号 PART 4).

Micro metal injection molding process for high performance titanium alloy. / Miura, Hideshi; Osada, Toshiko; Tanaka, Shigeo; Uemura, Makoto.

Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 4. 編 2007. p. 3667-3672 (Materials Science Forum; 巻 539-543, 番号 PART 4).

研究成果: 著書/レポートタイプへの貢献会議での発言

Miura, H, Osada, T, Tanaka, S & Uemura, M 2007, Micro metal injection molding process for high performance titanium alloy. : Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 4 Edn, Materials Science Forum, 番号 PART 4, 巻. 539-543, pp. 3667-3672, 5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006, Vancouver, カナダ, 7/4/06.
Miura H, Osada T, Tanaka S, Uemura M. Micro metal injection molding process for high performance titanium alloy. : Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 4 版 2007. p. 3667-3672. (Materials Science Forum; PART 4).
Miura, Hideshi ; Osada, Toshiko ; Tanaka, Shigeo ; Uemura, Makoto. / Micro metal injection molding process for high performance titanium alloy. Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 4. 版 2007. pp. 3667-3672 (Materials Science Forum; PART 4).
@inproceedings{e41d4f2025934dd2b8c0b6d305ed895f,
title = "Micro metal injection molding process for high performance titanium alloy",
abstract = "In this study, gas nitriding was processed for various sizes of Ti specimens which were produced by metal injection molding (MIM) process, for the sake of enabling the high functionality at low processing cost. It was shown by the nitriding treatment that the hardness of the surface increased extremely and the microstructure changed to the TiN and acicular α-Ti phase. With respect to the effect of the nitriding on the size of parts, micro dumbbell specimen had around five times higher content of nitrogen than the block ones. It was suggested that the size of μ-MIM products is so small that the surface treatment can contribute significantly to improve the properties, and then gas nitriding process may be one of effective surface treatment methods for high functionality of μ-MIM Ti products.",
author = "Hideshi Miura and Toshiko Osada and Shigeo Tanaka and Makoto Uemura",
year = "2007",
month = "12",
day = "1",
language = "English",
isbn = "0878494286",
series = "Materials Science Forum",
number = "PART 4",
pages = "3667--3672",
booktitle = "Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006",
edition = "PART 4",

}

TY - GEN

T1 - Micro metal injection molding process for high performance titanium alloy

AU - Miura, Hideshi

AU - Osada, Toshiko

AU - Tanaka, Shigeo

AU - Uemura, Makoto

PY - 2007/12/1

Y1 - 2007/12/1

N2 - In this study, gas nitriding was processed for various sizes of Ti specimens which were produced by metal injection molding (MIM) process, for the sake of enabling the high functionality at low processing cost. It was shown by the nitriding treatment that the hardness of the surface increased extremely and the microstructure changed to the TiN and acicular α-Ti phase. With respect to the effect of the nitriding on the size of parts, micro dumbbell specimen had around five times higher content of nitrogen than the block ones. It was suggested that the size of μ-MIM products is so small that the surface treatment can contribute significantly to improve the properties, and then gas nitriding process may be one of effective surface treatment methods for high functionality of μ-MIM Ti products.

AB - In this study, gas nitriding was processed for various sizes of Ti specimens which were produced by metal injection molding (MIM) process, for the sake of enabling the high functionality at low processing cost. It was shown by the nitriding treatment that the hardness of the surface increased extremely and the microstructure changed to the TiN and acicular α-Ti phase. With respect to the effect of the nitriding on the size of parts, micro dumbbell specimen had around five times higher content of nitrogen than the block ones. It was suggested that the size of μ-MIM products is so small that the surface treatment can contribute significantly to improve the properties, and then gas nitriding process may be one of effective surface treatment methods for high functionality of μ-MIM Ti products.

UR - http://www.scopus.com/inward/record.url?scp=38349071141&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=38349071141&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:38349071141

SN - 0878494286

SN - 9780878494286

T3 - Materials Science Forum

SP - 3667

EP - 3672

BT - Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006

ER -