高性能SOFC開発に向けた電極電解質積層材料の微細加工および断面形状制御

研究成果: Contribution to journalArticle

抄録

<p>Solid oxide fuel cells (SOFC) is a fuel cell boasting the highest power generation performance, but its energy density is low, and downsizing is a problem. On the other hand, by applying a pattern to the interface between the electrode and the electrolyte, it is possible to increase the amount of power generation per volume. In this study, imprint processing is performed on an electrode and electrolyte laminate material composed of particle dispersion resin, which is a material of SOFC, to concurrently impart a wave pattern of order of several micrometers to the electrolyte surface and the laminated interface. Since the method of controlling the interface shape at the imprint processing has not yet been established, we understand the deformation behavior of the particle dispersion resin and optimize the interface shape.</p>
寄稿の翻訳タイトルMicrofabrication and cross-sectional shape control of electrode and electrolyte laminate materials for high performance SOFC development
本文言語日本語
ページ(範囲)S0440101
ジャーナル年次大会
2018
0
DOI
出版ステータス出版済み - 2018

フィンガープリント

「高性能SOFC開発に向けた電極電解質積層材料の微細加工および断面形状制御」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル