Microfluidic baker's transformation device for three-dimensional rapid mixing

Takao Yasui, Yusuke Omoto, Keiko Osato, Noritada Kaji, Norikazu Suzuki, Toyohiro Naito, Masaki Watanabe, Yukihiro Okamoto, Manabu Tokeshi, Eiji Shamoto, Yoshinobu Baba

研究成果: Contribution to journalArticle査読

38 被引用数 (Scopus)

抄録

We developed a new passive-type micromixer based on the baker's transformation and realized a fast mixing of a protein solution, which has lower diffusion constant. The baker's transformation is an ideal mixing method, but there is no report on the microfluidic baker's transformation (MBT), since it is required to fabricate the complicated three-dimensional (3D) structure to realize the MBT device. In this note, we successfully fabricate the MBT device by using precision diamond cutting of an oxygen-free copper substrate for the mould fabrication and PDMS replication. The MBT device with 10.4 mm mixing length enables us to achieve complete mixing of a FITC solution (D = 2.6 × 10-10 m2 s-1) within 51 ms and an IgG solution (D = 4.6 × 10-11 m2 s-1) within 306 ms. Its mixing speed is 70-fold higher for a FITC solution and 900-fold higher for an IgG solution than the mixing speed by the microchannel without MBT structures. The Péclet number to attain complete mixing in the MBT device is estimated to be 6.9 × 104.

本文言語英語
ページ(範囲)3356-3360
ページ数5
ジャーナルLab on a Chip
11
19
DOI
出版ステータス出版済み - 10 7 2011
外部発表はい

All Science Journal Classification (ASJC) codes

  • Bioengineering
  • Biochemistry
  • Chemistry(all)
  • Biomedical Engineering

フィンガープリント 「Microfluidic baker's transformation device for three-dimensional rapid mixing」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル