Micrographic Digital Image Correlation Coupled with Microlithography: Case Study of Strain Localization and Subsequent Cracking at an FIB Notch Tip in a Laminated Ti-6Al-4V Alloy

M. Koyama, Y. Tanaka, K. Tsuzaki

研究成果: Contribution to journalArticle査読

6 被引用数 (Scopus)

抄録

This study presents a microlithography-based approach to increase the spatial resolution of strain mapping by micrographic digital image correlation. A micro-mesh with a lattice size of 500 nm was added on the surface of a Ti-6Al-4V alloy specimen with a coarse lath size of 1.1 μm. Although the micro-mesh pattern was not random, a combination of the laminated microstructure and the micro-mesh enabled sub-micrometer strain mapping through digital image correlation even for coarse lath larger than 1 μm. Specifically, the strain mapping technique used in this study was applied to characterize the strain component and distribution near an artificial sharp micro-stress concentration site introduced by a focused ion beam. The strain characterization under tensile deformation clarified that cracking occurred via shear strain localization at the micro-stress concentration site, indicating that accumulation of damage (such as vacancy or dislocation) plays an important role in the cracking mechanism of the Ti-6Al-4V alloy.

本文言語英語
ページ(範囲)381-386
ページ数6
ジャーナルExperimental Mechanics
58
2
DOI
出版ステータス出版済み - 2 1 2018

All Science Journal Classification (ASJC) codes

  • Aerospace Engineering
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント 「Micrographic Digital Image Correlation Coupled with Microlithography: Case Study of Strain Localization and Subsequent Cracking at an FIB Notch Tip in a Laminated Ti-6Al-4V Alloy」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル