Microstructural change during isothermal aging in high manganese austenitic steels

Yoshinori Ono, Toshihiro Tsuchiyama, Setsuo Takaki

    研究成果: Contribution to journalArticle査読

    9 被引用数 (Scopus)

    抄録

    Microstructural change during isothermal aging has been investigated 13%Mn-0.9%C and 22%Mn-0.6%C steels by means of optical and electron microscopy and X-ray diffractometry. High manganese austenitic steels undergo three kinds of reactions during isothermal aging; (1) grain boundary precipitation of carbide, (2) precipitation of platelet carbide within austenite (γ) grains and (3) formation of lamellar structure through eutectoid transformation (γ→ferrite (α)+carbide). In 13%Mn-0.9%C steel, all of the reactions occur and the carbide concerning the reactions is M3C in any case. On the other hand, in 22%Mn-0.6%C steel, only two of them occur; grain boundary precipitation of M23C6 carbide (not M3C) and the eutectoid transformation (γYLDα+M3C). Besides, both of the two reactions in 22%Mn-0.6%C steel were effectively suppressed due to the chemical composition; high Mn and low C content. Eutectoid transformation proceeds by being supplied carbon from untransformed γ, so that this results in the shortage of carbon in untransformed γ during isothermal aging and the γ phase undergoes γ→ε (hcp) martensitic transformation on the following cooling.

    本文言語英語
    ページ(範囲)309-314
    ページ数6
    ジャーナルTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
    84
    4
    DOI
    出版ステータス出版済み - 1998

    All Science Journal Classification (ASJC) codes

    • 凝縮系物理学
    • 物理化学および理論化学
    • 金属および合金
    • 材料化学

    フィンガープリント

    「Microstructural change during isothermal aging in high manganese austenitic steels」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル