Microstructural details of hydrogen diffusion and storage in Ti–V–Cr alloys activated through surface and bulk severe plastic deformation

Marc Novelli, K. Edalati, S. Itano, Hai Wen Li, E. Akiba, Z. Horita, Thierry Grosdidier

研究成果: ジャーナルへの寄稿記事

抜粋

Structural observations were carried out on particles obtained after hydrogenation cycling of the Ti25V50Cr25 and Ti10V75Cr15 alloys processed by surface or bulk severe plastic deformation using the surface mechanical attrition treatment (SMAT) and high-pressure torsion (HPT) techniques, respectively. The produced particles differ in morphologies and fracture mode due to the differences in hydrogen diffusion paths. The fracture mode for the SMAT-processed samples with the gradient microstructure was mainly intragranular, whereas it was intergranular for the nanograined HPT processed samples. Hydrogen diffusion, which initiated at the grain boundaries on the surface, created Ti-rich and V-lean areas. The powders contained mainly β-VH monohydride and partly γ-VH2 dihydride, and an orientation relationship of (100)β//(110)γ and [001]β//[001]γ with an angular deviation of ∼2.5° was observed between the two phases using the electron backscattered diffraction (EBSD) analysis.

元の言語英語
ページ(範囲)5326-5336
ページ数11
ジャーナルInternational Journal of Hydrogen Energy
45
発行部数8
DOI
出版物ステータス出版済み - 1 1 2019

    フィンガープリント

All Science Journal Classification (ASJC) codes

  • Renewable Energy, Sustainability and the Environment
  • Fuel Technology
  • Condensed Matter Physics
  • Energy Engineering and Power Technology

これを引用