Microstructural evolution in high purity aluminum processed by ECAP

Megumi Kawasaki, Zenji Horita, Terence G. Langdon

    研究成果: Contribution to journalArticle査読

    200 被引用数 (Scopus)

    抄録

    High purity (99.99%) aluminum was processed by equal-channel angular pressing (ECAP) through 1-12 passes and examined using orientation imaging microscopy. The results reveal two distinct processing regimes: from 1 to 4 passes the microstructure evolves from elongated subgrains to an essentially equiaxed array of ultrafine grains and from 4 to 12 passes there is no measurable change in the average grain size and grain aspect ratio. The boundary misorientation angle and the fraction of high-angle boundaries increase rapidly up to 4 passes and at a slower rate from 4 to 12 passes. Anomalously large grains were visible in the central region of the billet pressed through 12 passes due to dynamic recovery and grain growth. The results suggest optimum processing is achieved by pressing through 4-8 passes.

    本文言語英語
    ページ(範囲)143-150
    ページ数8
    ジャーナルMaterials Science and Engineering A
    524
    1-2
    DOI
    出版ステータス出版済み - 10 25 2009

    All Science Journal Classification (ASJC) codes

    • Materials Science(all)
    • Condensed Matter Physics
    • Mechanics of Materials
    • Mechanical Engineering

    フィンガープリント 「Microstructural evolution in high purity aluminum processed by ECAP」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル