Microstructure and mechanical properties of aluminum-fullerene composite fabricated by high pressure torsion

Tomoharu Tokunaga; Kenji Kaneko; Keisuke Sato; Zenji Horita

doi:10.1016/j.scriptamat.2007.12.010

Microstructure and mechanical properties of aluminum-fullerene composite fabricated by high pressure torsion

Tomoharu Tokunaga, Kenji Kaneko, Keisuke Sato, Zenji Horita

研究成果: ジャーナルへの寄稿 › 学術誌 › 査読

76 被引用数 (Scopus)

抄録

An Al-based composite containing fullerene (a mixture of C₆₀ and C₇₀) was fabricated using a process of severe plastic deformation through high pressure torsion (HPT) for the first time. Neither heating nor sintering was required during the HPT process, so in situ consolidation was successfully achieved at ambient temperature. Vickers microhardness reached almost 120 Hv, the composite had a tensile strength of more than 253 MPa with 0.18 nominal strain, and the grain size was reduced to ∼80 nm.

本文言語	英語
ページ（範囲）	735-738
ページ数	4
ジャーナル	Scripta Materialia
巻	58
号	9
DOI	https://doi.org/10.1016/j.scriptamat.2007.12.010
出版ステータス	出版済み - 5月 2008

!!!All Science Journal Classification (ASJC) codes

材料科学（全般）
凝縮系物理学
材料力学
機械工学
金属および合金

文献へのアクセス

10.1016/j.scriptamat.2007.12.010

他のファイルとリンク

引用スタイル

@article{cbfae988a3c74f709d8135365cd68940,

title = "Microstructure and mechanical properties of aluminum-fullerene composite fabricated by high pressure torsion",

abstract = "An Al-based composite containing fullerene (a mixture of C60 and C70) was fabricated using a process of severe plastic deformation through high pressure torsion (HPT) for the first time. Neither heating nor sintering was required during the HPT process, so in situ consolidation was successfully achieved at ambient temperature. Vickers microhardness reached almost 120 Hv, the composite had a tensile strength of more than 253 MPa with 0.18 nominal strain, and the grain size was reduced to ∼80 nm.",

author = "Tomoharu Tokunaga and Kenji Kaneko and Keisuke Sato and Zenji Horita",

note = "Funding Information: This work was supported in part by a “Grant-in-Aid for Scientific Research” and on Priority Areas “Giant Straining Process for Advanced Materials Containing Ultra-High Density Lattice Defects” from the Ministry of Education, Culture, Sports, Science and Technology, Japan.",

year = "2008",

month = may,

doi = "10.1016/j.scriptamat.2007.12.010",

language = "English",

volume = "58",

pages = "735--738",

journal = "Scripta Materialia",

issn = "1359-6462",

publisher = "Elsevier Limited",

number = "9",

}

TY - JOUR

T1 - Microstructure and mechanical properties of aluminum-fullerene composite fabricated by high pressure torsion

AU - Tokunaga, Tomoharu

AU - Kaneko, Kenji

AU - Sato, Keisuke

AU - Horita, Zenji

N1 - Funding Information: This work was supported in part by a “Grant-in-Aid for Scientific Research” and on Priority Areas “Giant Straining Process for Advanced Materials Containing Ultra-High Density Lattice Defects” from the Ministry of Education, Culture, Sports, Science and Technology, Japan.

PY - 2008/5

Y1 - 2008/5

N2 - An Al-based composite containing fullerene (a mixture of C60 and C70) was fabricated using a process of severe plastic deformation through high pressure torsion (HPT) for the first time. Neither heating nor sintering was required during the HPT process, so in situ consolidation was successfully achieved at ambient temperature. Vickers microhardness reached almost 120 Hv, the composite had a tensile strength of more than 253 MPa with 0.18 nominal strain, and the grain size was reduced to ∼80 nm.

AB - An Al-based composite containing fullerene (a mixture of C60 and C70) was fabricated using a process of severe plastic deformation through high pressure torsion (HPT) for the first time. Neither heating nor sintering was required during the HPT process, so in situ consolidation was successfully achieved at ambient temperature. Vickers microhardness reached almost 120 Hv, the composite had a tensile strength of more than 253 MPa with 0.18 nominal strain, and the grain size was reduced to ∼80 nm.

UR - http://www.scopus.com/inward/record.url?scp=40049092122&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=40049092122&partnerID=8YFLogxK

U2 - 10.1016/j.scriptamat.2007.12.010

DO - 10.1016/j.scriptamat.2007.12.010

M3 - Article

AN - SCOPUS:40049092122

VL - 58

SP - 735

EP - 738

JO - Scripta Materialia

JF - Scripta Materialia

SN - 1359-6462

IS - 9

ER -

Microstructure and mechanical properties of aluminum-fullerene composite fabricated by high pressure torsion

抄録

!!!All Science Journal Classification (ASJC) codes

文献へのアクセス

他のファイルとリンク

フィンガープリント

引用スタイル