Modelling and measurement of high pressure sprays, Ignition and combustion of Heavy Fuel Oil and Marine Diesel Oil

Laurie Goldsworthy, Hiroshi Tajima, Chin Bong

研究成果: 会議への寄与タイプ論文

抄録

Measurements of spray angle, spray penetration, ignition delay, flame extent and flame temperature are made in an optically accessible, electrically heated constant volume chamber of relatively large dimensions. Both Marine Diesel Oil (MDO) and a poor quality Heavy Fuel Oil (BFO) are analysed and compared. Soot temperature is measured using the two-colour method. The measured data are compared with predictions using the CFD package StarCD. Fuel evaporation, ignition and combustion models developed specifically for heavy residual fuel oil are applied. Initial spray atomisation is modelled with the blob method as well as with the Max Plank Institute (MPI) model, which creates a denser spray core than the blob atomisation model, as well as child droplets from aerodynamic stripping and collision. The denser core results in increased droplet coalescence during the subsequent secondary breakup phase, resulting in greater droplet persistence and spray penetration during combustion. Droplet persistence and spray penetration is much greater for BFO than MDO. Higher chamber initial temperature significantly reduces ignition delay period and flame lift-off distance. Flame lift-off distance and ignition delay for MDO are less than for BFO. The models reproduce these trends.

元の言語英語
出版物ステータス出版済み - 12 1 2006
イベント10th International Conference on Liquid Atomization and Spray Systems, ICLASS 2006 - Kyoto, 日本
継続期間: 8 27 20069 1 2006

その他

その他10th International Conference on Liquid Atomization and Spray Systems, ICLASS 2006
日本
Kyoto
期間8/27/069/1/06

Fingerprint

Fuel Oils
Residual fuels
Fuel oils
Ignition
Oils
Atomization
Soot
Coalescence
Temperature
Aerodynamics
Computational fluid dynamics
Evaporation
Color

All Science Journal Classification (ASJC) codes

  • Surfaces, Coatings and Films

これを引用

Goldsworthy, L., Tajima, H., & Bong, C. (2006). Modelling and measurement of high pressure sprays, Ignition and combustion of Heavy Fuel Oil and Marine Diesel Oil. 論文発表場所 10th International Conference on Liquid Atomization and Spray Systems, ICLASS 2006, Kyoto, 日本.

Modelling and measurement of high pressure sprays, Ignition and combustion of Heavy Fuel Oil and Marine Diesel Oil. / Goldsworthy, Laurie; Tajima, Hiroshi; Bong, Chin.

2006. 論文発表場所 10th International Conference on Liquid Atomization and Spray Systems, ICLASS 2006, Kyoto, 日本.

研究成果: 会議への寄与タイプ論文

Goldsworthy, L, Tajima, H & Bong, C 2006, 'Modelling and measurement of high pressure sprays, Ignition and combustion of Heavy Fuel Oil and Marine Diesel Oil', 論文発表場所 10th International Conference on Liquid Atomization and Spray Systems, ICLASS 2006, Kyoto, 日本, 8/27/06 - 9/1/06.
Goldsworthy L, Tajima H, Bong C. Modelling and measurement of high pressure sprays, Ignition and combustion of Heavy Fuel Oil and Marine Diesel Oil. 2006. 論文発表場所 10th International Conference on Liquid Atomization and Spray Systems, ICLASS 2006, Kyoto, 日本.
Goldsworthy, Laurie ; Tajima, Hiroshi ; Bong, Chin. / Modelling and measurement of high pressure sprays, Ignition and combustion of Heavy Fuel Oil and Marine Diesel Oil. 論文発表場所 10th International Conference on Liquid Atomization and Spray Systems, ICLASS 2006, Kyoto, 日本.
@conference{be375a95f0984d6ba50524c34fc4342a,
title = "Modelling and measurement of high pressure sprays, Ignition and combustion of Heavy Fuel Oil and Marine Diesel Oil",
abstract = "Measurements of spray angle, spray penetration, ignition delay, flame extent and flame temperature are made in an optically accessible, electrically heated constant volume chamber of relatively large dimensions. Both Marine Diesel Oil (MDO) and a poor quality Heavy Fuel Oil (BFO) are analysed and compared. Soot temperature is measured using the two-colour method. The measured data are compared with predictions using the CFD package StarCD. Fuel evaporation, ignition and combustion models developed specifically for heavy residual fuel oil are applied. Initial spray atomisation is modelled with the blob method as well as with the Max Plank Institute (MPI) model, which creates a denser spray core than the blob atomisation model, as well as child droplets from aerodynamic stripping and collision. The denser core results in increased droplet coalescence during the subsequent secondary breakup phase, resulting in greater droplet persistence and spray penetration during combustion. Droplet persistence and spray penetration is much greater for BFO than MDO. Higher chamber initial temperature significantly reduces ignition delay period and flame lift-off distance. Flame lift-off distance and ignition delay for MDO are less than for BFO. The models reproduce these trends.",
author = "Laurie Goldsworthy and Hiroshi Tajima and Chin Bong",
year = "2006",
month = "12",
day = "1",
language = "English",
note = "10th International Conference on Liquid Atomization and Spray Systems, ICLASS 2006 ; Conference date: 27-08-2006 Through 01-09-2006",

}

TY - CONF

T1 - Modelling and measurement of high pressure sprays, Ignition and combustion of Heavy Fuel Oil and Marine Diesel Oil

AU - Goldsworthy, Laurie

AU - Tajima, Hiroshi

AU - Bong, Chin

PY - 2006/12/1

Y1 - 2006/12/1

N2 - Measurements of spray angle, spray penetration, ignition delay, flame extent and flame temperature are made in an optically accessible, electrically heated constant volume chamber of relatively large dimensions. Both Marine Diesel Oil (MDO) and a poor quality Heavy Fuel Oil (BFO) are analysed and compared. Soot temperature is measured using the two-colour method. The measured data are compared with predictions using the CFD package StarCD. Fuel evaporation, ignition and combustion models developed specifically for heavy residual fuel oil are applied. Initial spray atomisation is modelled with the blob method as well as with the Max Plank Institute (MPI) model, which creates a denser spray core than the blob atomisation model, as well as child droplets from aerodynamic stripping and collision. The denser core results in increased droplet coalescence during the subsequent secondary breakup phase, resulting in greater droplet persistence and spray penetration during combustion. Droplet persistence and spray penetration is much greater for BFO than MDO. Higher chamber initial temperature significantly reduces ignition delay period and flame lift-off distance. Flame lift-off distance and ignition delay for MDO are less than for BFO. The models reproduce these trends.

AB - Measurements of spray angle, spray penetration, ignition delay, flame extent and flame temperature are made in an optically accessible, electrically heated constant volume chamber of relatively large dimensions. Both Marine Diesel Oil (MDO) and a poor quality Heavy Fuel Oil (BFO) are analysed and compared. Soot temperature is measured using the two-colour method. The measured data are compared with predictions using the CFD package StarCD. Fuel evaporation, ignition and combustion models developed specifically for heavy residual fuel oil are applied. Initial spray atomisation is modelled with the blob method as well as with the Max Plank Institute (MPI) model, which creates a denser spray core than the blob atomisation model, as well as child droplets from aerodynamic stripping and collision. The denser core results in increased droplet coalescence during the subsequent secondary breakup phase, resulting in greater droplet persistence and spray penetration during combustion. Droplet persistence and spray penetration is much greater for BFO than MDO. Higher chamber initial temperature significantly reduces ignition delay period and flame lift-off distance. Flame lift-off distance and ignition delay for MDO are less than for BFO. The models reproduce these trends.

UR - http://www.scopus.com/inward/record.url?scp=84874691258&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84874691258&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84874691258

ER -