Multi-stage coking for more tar and formed coke of higher strength. 4. Formed coking of residues extracted from heat-treated single coals with a mixed solvent of N-methylpyrrolidinone and carbon disulphide

Isao Mochida, Naoki Motoshima, Hisashi Nakagawara, Yozo Korai

研究成果: ジャーナルへの寄稿学術誌査読

2 被引用数 (Scopus)

抄録

A mixed solvent of N-methylpyrrolidinone and carbon disulphide (MP-CS2) was found to extract very large amounts of tarry substance from bituminous coals of C% above 80% and the residue provided a high mechanical strength of its formed coke. However, coals of C% below 80% exhibited rather low solubility and the formed cokes from their residues were not strong enough. The preheat-treatment at 450 °C under 1 MPa nitrogen pressure increased significantly the extract yield and tensile strength of the formed cokes from the residues especially with coals of C% below 80%. The origins of coking properties of the coal are briefly discussed based on the present particular results obtained by MP-CS2 extraction.

本文言語英語
ページ(範囲)529-532
ページ数4
ジャーナルFuel
70
4
DOI
出版ステータス出版済み - 4月 1991

!!!All Science Journal Classification (ASJC) codes

  • 化学工学(全般)
  • 燃料技術
  • エネルギー工学および電力技術
  • 有機化学

フィンガープリント

「Multi-stage coking for more tar and formed coke of higher strength. 4. Formed coking of residues extracted from heat-treated single coals with a mixed solvent of N-methylpyrrolidinone and carbon disulphide」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル