Nano-rheological analysis of polymer cross-section films prepared by a mechanical cutting method

Keiichi Akabori, Kazuyuki Oya, Hiroki Murase, Keiji Tanaka, Atsushi Takahara, Tisato Kajiyama

研究成果: 著書/レポートタイプへの貢献会議での発言

抄録

A cross-section film of a symmetric diblock copolymer, in which lamellar structure was formed, was successfully prepared by a mechanical cutting method using a sharp diamond knife. In this method, the knife was obliquely pushed into the sample from the surface side. The oblique angle was precisely controlled to be 0.57 deg. Thus, periodic lamellar structure was shown up at the surface of the cross-section film Then, scanning viscoelasticity microscopy (SVM), which can image viscoelastic information at the surface, was applied to the cross-section film. Finally, it was demonstrated that a combination of SVM and mechanical cutting method enabled one to gain direct insight into the depth information for structure and physical properties of the diblock copolymer film along the direction normal to the surface.

元の言語英語
ホスト出版物のタイトルPolymer Preprints, Japan - 55th SPSJ Annual Meeting
ページ1270
ページ数1
55
エディション1
出版物ステータス出版済み - 2006
イベント55th SPSJ Annual Meeting - Nagoya, 日本
継続期間: 5 24 20065 26 2006

その他

その他55th SPSJ Annual Meeting
日本
Nagoya
期間5/24/065/26/06

Fingerprint

Lamellar structures
Viscoelasticity
Polymers
Block copolymers
Microscopic examination
Scanning
Diamonds
Physical properties

All Science Journal Classification (ASJC) codes

  • Engineering(all)

これを引用

Akabori, K., Oya, K., Murase, H., Tanaka, K., Takahara, A., & Kajiyama, T. (2006). Nano-rheological analysis of polymer cross-section films prepared by a mechanical cutting method. : Polymer Preprints, Japan - 55th SPSJ Annual Meeting (1 版, 巻 55, pp. 1270)

Nano-rheological analysis of polymer cross-section films prepared by a mechanical cutting method. / Akabori, Keiichi; Oya, Kazuyuki; Murase, Hiroki; Tanaka, Keiji; Takahara, Atsushi; Kajiyama, Tisato.

Polymer Preprints, Japan - 55th SPSJ Annual Meeting. 巻 55 1. 編 2006. p. 1270.

研究成果: 著書/レポートタイプへの貢献会議での発言

Akabori, K, Oya, K, Murase, H, Tanaka, K, Takahara, A & Kajiyama, T 2006, Nano-rheological analysis of polymer cross-section films prepared by a mechanical cutting method. : Polymer Preprints, Japan - 55th SPSJ Annual Meeting. 1 Edn, 巻. 55, pp. 1270, 55th SPSJ Annual Meeting, Nagoya, 日本, 5/24/06.
Akabori K, Oya K, Murase H, Tanaka K, Takahara A, Kajiyama T. Nano-rheological analysis of polymer cross-section films prepared by a mechanical cutting method. : Polymer Preprints, Japan - 55th SPSJ Annual Meeting. 1 版 巻 55. 2006. p. 1270
Akabori, Keiichi ; Oya, Kazuyuki ; Murase, Hiroki ; Tanaka, Keiji ; Takahara, Atsushi ; Kajiyama, Tisato. / Nano-rheological analysis of polymer cross-section films prepared by a mechanical cutting method. Polymer Preprints, Japan - 55th SPSJ Annual Meeting. 巻 55 1. 版 2006. pp. 1270
@inproceedings{907f42e457bd4d49b0e9241eec004702,
title = "Nano-rheological analysis of polymer cross-section films prepared by a mechanical cutting method",
abstract = "A cross-section film of a symmetric diblock copolymer, in which lamellar structure was formed, was successfully prepared by a mechanical cutting method using a sharp diamond knife. In this method, the knife was obliquely pushed into the sample from the surface side. The oblique angle was precisely controlled to be 0.57 deg. Thus, periodic lamellar structure was shown up at the surface of the cross-section film Then, scanning viscoelasticity microscopy (SVM), which can image viscoelastic information at the surface, was applied to the cross-section film. Finally, it was demonstrated that a combination of SVM and mechanical cutting method enabled one to gain direct insight into the depth information for structure and physical properties of the diblock copolymer film along the direction normal to the surface.",
author = "Keiichi Akabori and Kazuyuki Oya and Hiroki Murase and Keiji Tanaka and Atsushi Takahara and Tisato Kajiyama",
year = "2006",
language = "English",
volume = "55",
pages = "1270",
booktitle = "Polymer Preprints, Japan - 55th SPSJ Annual Meeting",
edition = "1",

}

TY - GEN

T1 - Nano-rheological analysis of polymer cross-section films prepared by a mechanical cutting method

AU - Akabori, Keiichi

AU - Oya, Kazuyuki

AU - Murase, Hiroki

AU - Tanaka, Keiji

AU - Takahara, Atsushi

AU - Kajiyama, Tisato

PY - 2006

Y1 - 2006

N2 - A cross-section film of a symmetric diblock copolymer, in which lamellar structure was formed, was successfully prepared by a mechanical cutting method using a sharp diamond knife. In this method, the knife was obliquely pushed into the sample from the surface side. The oblique angle was precisely controlled to be 0.57 deg. Thus, periodic lamellar structure was shown up at the surface of the cross-section film Then, scanning viscoelasticity microscopy (SVM), which can image viscoelastic information at the surface, was applied to the cross-section film. Finally, it was demonstrated that a combination of SVM and mechanical cutting method enabled one to gain direct insight into the depth information for structure and physical properties of the diblock copolymer film along the direction normal to the surface.

AB - A cross-section film of a symmetric diblock copolymer, in which lamellar structure was formed, was successfully prepared by a mechanical cutting method using a sharp diamond knife. In this method, the knife was obliquely pushed into the sample from the surface side. The oblique angle was precisely controlled to be 0.57 deg. Thus, periodic lamellar structure was shown up at the surface of the cross-section film Then, scanning viscoelasticity microscopy (SVM), which can image viscoelastic information at the surface, was applied to the cross-section film. Finally, it was demonstrated that a combination of SVM and mechanical cutting method enabled one to gain direct insight into the depth information for structure and physical properties of the diblock copolymer film along the direction normal to the surface.

UR - http://www.scopus.com/inward/record.url?scp=33749668527&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33749668527&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:33749668527

VL - 55

SP - 1270

BT - Polymer Preprints, Japan - 55th SPSJ Annual Meeting

ER -