Nanomaterials for advanced electrode of low temperature solid oxide fuel cells (SOFCs)

    研究成果: ジャーナルへの寄稿総説査読

    25 被引用数 (Scopus)


    The application of nanomaterials for electrodes of intermediate temperature solid oxide fuel cells (SOFC) is introduced. In conventional SOFCs, the operating temperature is higher than 1073 K, and so application of nanomaterials is not suitable because of the high degradation rate that results from sintering, aggregation, or reactions. However, by allowing a decrease of the operating temperature, nanomaterials are attracting much interest. In this review, nanocomposite films with columnar morphology, called double columnar or vertically aligned nanocomposites and prepared by pulsed laser ablation method, are introduced. For anodes, metal nano particles prepared by exsolution from perovskite lattice are also applied. By using dissolution and exsolution into and from the perovskite matrix, performed by changing Po2 in the gas phase at each interval, recovery of the power density can be achieved by keeping the metal particle size small. Therefore, it is expected that the application of nanomaterials will become more popular in future SOFC development.

    ジャーナルJournal of the Korean Ceramic Society
    出版ステータス出版済み - 9月 2016

    !!!All Science Journal Classification (ASJC) codes

    • セラミックおよび複合材料


    「Nanomaterials for advanced electrode of low temperature solid oxide fuel cells (SOFCs)」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。