Non-uniform sintering behavior during spark plasma sintering of Y2O3

Ji Hwoan Lee, Byung Nam Kim, Byung Koog Jang

研究成果: ジャーナルへの寄稿記事

抄録

During spark plasma sintering of Y2O3 ceramics, the evolution of non-uniform microstructure was observed, depending on the heating rate. At low heating rates, the appearance of the sintered bodies is relatively uniform, and the grain size is slightly larger in the center than in the periphery. At high heating rates, however, the sintered bodies are apparently non-uniform to reveal opaque center and translucent periphery, and a difference in the grain size between the center and the periphery increases remarkably. The porosity and the pore size in the center also increase with holding time. The evolution mechanism of the non-uniform microstructure is explained by using a concept of dynamic grain growth and by assuming defect diffusion from the periphery to the center under complicated electric and magnetic fields during spark plasma sintering.

元の言語英語
ジャーナルCeramics International
DOI
出版物ステータス受理済み/印刷中 - 1 1 2019

Fingerprint

Spark plasma sintering
Heating rate
Sintering
Microstructure
Grain growth
Pore size
Porosity
Electric fields
Magnetic fields
Defects

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites
  • Process Chemistry and Technology
  • Surfaces, Coatings and Films
  • Materials Chemistry

これを引用

Non-uniform sintering behavior during spark plasma sintering of Y2O3 . / Lee, Ji Hwoan; Kim, Byung Nam; Jang, Byung Koog.

:: Ceramics International, 01.01.2019.

研究成果: ジャーナルへの寄稿記事

@article{8ef9000f4f564188bbfd7c56eaee4b59,
title = "Non-uniform sintering behavior during spark plasma sintering of Y2O3",
abstract = "During spark plasma sintering of Y2O3 ceramics, the evolution of non-uniform microstructure was observed, depending on the heating rate. At low heating rates, the appearance of the sintered bodies is relatively uniform, and the grain size is slightly larger in the center than in the periphery. At high heating rates, however, the sintered bodies are apparently non-uniform to reveal opaque center and translucent periphery, and a difference in the grain size between the center and the periphery increases remarkably. The porosity and the pore size in the center also increase with holding time. The evolution mechanism of the non-uniform microstructure is explained by using a concept of dynamic grain growth and by assuming defect diffusion from the periphery to the center under complicated electric and magnetic fields during spark plasma sintering.",
author = "Lee, {Ji Hwoan} and Kim, {Byung Nam} and Jang, {Byung Koog}",
year = "2019",
month = "1",
day = "1",
doi = "10.1016/j.ceramint.2019.10.070",
language = "English",
journal = "Ceramics International",
issn = "0272-8842",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Non-uniform sintering behavior during spark plasma sintering of Y2O3

AU - Lee, Ji Hwoan

AU - Kim, Byung Nam

AU - Jang, Byung Koog

PY - 2019/1/1

Y1 - 2019/1/1

N2 - During spark plasma sintering of Y2O3 ceramics, the evolution of non-uniform microstructure was observed, depending on the heating rate. At low heating rates, the appearance of the sintered bodies is relatively uniform, and the grain size is slightly larger in the center than in the periphery. At high heating rates, however, the sintered bodies are apparently non-uniform to reveal opaque center and translucent periphery, and a difference in the grain size between the center and the periphery increases remarkably. The porosity and the pore size in the center also increase with holding time. The evolution mechanism of the non-uniform microstructure is explained by using a concept of dynamic grain growth and by assuming defect diffusion from the periphery to the center under complicated electric and magnetic fields during spark plasma sintering.

AB - During spark plasma sintering of Y2O3 ceramics, the evolution of non-uniform microstructure was observed, depending on the heating rate. At low heating rates, the appearance of the sintered bodies is relatively uniform, and the grain size is slightly larger in the center than in the periphery. At high heating rates, however, the sintered bodies are apparently non-uniform to reveal opaque center and translucent periphery, and a difference in the grain size between the center and the periphery increases remarkably. The porosity and the pore size in the center also increase with holding time. The evolution mechanism of the non-uniform microstructure is explained by using a concept of dynamic grain growth and by assuming defect diffusion from the periphery to the center under complicated electric and magnetic fields during spark plasma sintering.

UR - http://www.scopus.com/inward/record.url?scp=85073172035&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85073172035&partnerID=8YFLogxK

U2 - 10.1016/j.ceramint.2019.10.070

DO - 10.1016/j.ceramint.2019.10.070

M3 - Article

AN - SCOPUS:85073172035

JO - Ceramics International

JF - Ceramics International

SN - 0272-8842

ER -