Numerical and experimental methods to investigate cooling air flow in the construction machinery's engine compartment

Toshikazu Nakanishi, Sanshirou Shimoda, Nobuhiko Yamasaki, Yuzo Inokuchi, Tsuyoshi Takemoto, Hisashi Okazawa, Masanobu Namba

研究成果: Contribution to conferencePaper

抜粋

This paper describes 3-dimensional computational fluid dynamics analysis to estimate the air flow in the construction machinery's engine compartment and accompanying measurements. As the computational grid, tetrahedral cells with rotating reference frame fixed to the fan were used. In the measurement, the single yawed hot wire rotation method was used to measure the 3-dimensional velocity vectors. As a result, the measured values correspond well to the computational results.

元の言語英語
DOI
出版物ステータス出版済み - 12 1 2000
イベントInternational Off-Highway and Powerplant Congress and Exposition - Milwaukee, WI, 米国
継続期間: 9 11 20009 13 2000

その他

その他International Off-Highway and Powerplant Congress and Exposition
米国
Milwaukee, WI
期間9/11/009/13/00

All Science Journal Classification (ASJC) codes

  • Automotive Engineering
  • Safety, Risk, Reliability and Quality
  • Pollution
  • Industrial and Manufacturing Engineering

フィンガープリント Numerical and experimental methods to investigate cooling air flow in the construction machinery's engine compartment' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Nakanishi, T., Shimoda, S., Yamasaki, N., Inokuchi, Y., Takemoto, T., Okazawa, H., & Namba, M. (2000). Numerical and experimental methods to investigate cooling air flow in the construction machinery's engine compartment. 論文発表場所 International Off-Highway and Powerplant Congress and Exposition, Milwaukee, WI, 米国. https://doi.org/10.4271/2000-01-2577