Numerical simulation of blow molding - Prediction of parison diameter and thickness distributions in the parison formation process

Shuichi Tanoue, Toshihisa Kajiwara, Kazumori Funatsu, Kousuke Terada, Masashi Yamabe

研究成果: ジャーナルへの寄稿学術誌査読

14 被引用数 (Scopus)

抄録

In our previous study, we calculated the time course of parison length in the parison formation stage, but it could predict only the parison area swell. The next target in our study is to calculate the parison diameter and thickness swell. Annular extrudate swell simulation is necessary for the understanding of various kinds of swelling ratios in blow molding. We have examined three kinds of swells (outer diameter, thickness, and area swells) obtained from simulation results of annular extrudate swell, using the Giesekus model, and have developed a method of predicting parison outer diameter and thickness swell values. The predicted values of parison outer diameters are discussed in comparison with experimental data, and reasonable results are obtained by the proposed method. This prediction method could also be applied to the parison formation process using a parison controller. As a result, it is possible to predict approximately the whole process of parison formation by numerical simulation.

本文言語英語
ページ(範囲)2008-2017
ページ数10
ジャーナルPolymer Engineering and Science
36
15
DOI
出版ステータス出版済み - 8月 1996

!!!All Science Journal Classification (ASJC) codes

  • 化学 (全般)
  • ポリマーおよびプラスチック
  • 材料化学

フィンガープリント

「Numerical simulation of blow molding - Prediction of parison diameter and thickness distributions in the parison formation process」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル