Numerical simulation of CO2 gas microbubble of foamy oil

Chanmoly Or, Yuro Sasaki, Yuichi Sugai, Masanori Nakano, Motonao Imai

研究成果: Contribution to journalConference article査読

3 被引用数 (Scopus)

抄録

Heavy oil production by CO2 gas foaming has been simulated with a function of depressurization pressure. The numerical simulation was carried out by using CMG-STARS TM and based on experimental physical properties of foamy oil such as foam swelling and apparent viscosity. The matching between the numerical simulations of heavy oil drainage and experimental measurements of foaming in Berea sandstone cores (Psat = 10 MPa at 50 °C) shows 31% of oil recovery after depressurization to atmospheric pressure. The behavior of heavy oil production and production scheme were proposed with assuming the CO2 gas dissolution zone. The effect of initial oil saturation and CO2 dissolution zone are the controlling factors of heavy oil production.

本文言語英語
ページ(範囲)7821-7829
ページ数9
ジャーナルEnergy Procedia
63
DOI
出版ステータス出版済み - 2014
イベント12th International Conference on Greenhouse Gas Control Technologies, GHGT 2014 - Austin, 米国
継続期間: 10 5 201410 9 2014

All Science Journal Classification (ASJC) codes

  • Energy(all)

フィンガープリント 「Numerical simulation of CO<sub>2</sub> gas microbubble of foamy oil」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル