Numerical simulations of annular extrudate swell using various types of viscoelastic models

Yasuhiko Otsuki, Toshihisa Kajiwara, Kazumori Funatsu

研究成果: Contribution to journalArticle査読

34 被引用数 (Scopus)

抄録

In this study, numerical simulations of annular extrudate swell of high density polyethylene (HDPE) were carried out. Some important viscoelastic models, such as the Larson, the PTT and the K-BKZ model, were employed for the swell calculation through various types of dies. These numerical results were compared with the experimental ones. The numerical results of the swell behaviors were very different in each viscoelastic model, while their simple shear flow characteristics were almost the same. As a result, the uniaxial elongational viscosity for large deformation as the steady state region is not important, but the property for relatively small deformation has remarkable effects on the numerical results for the die that have a uniaxial contraction region. Both reversible and irreversible types were tried for the Larson model. It was found that there was a difference between the irreversibility assumption of the K-BKZ model and the Larson model. While there was a serious difference in the response for reversing strain among these viscoelastic models, the response was very important to predict annular extudate swell behavior.

本文言語英語
ページ(範囲)1969-1981
ページ数13
ジャーナルPolymer Engineering and Science
39
10
DOI
出版ステータス出版済み - 1 1 1999
外部発表はい

All Science Journal Classification (ASJC) codes

  • 化学 (全般)
  • ポリマーおよびプラスチック
  • 材料化学

フィンガープリント

「Numerical simulations of annular extrudate swell using various types of viscoelastic models」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル