Observation and numerical simulation of oil-film formation under reciprocating rolling point contact

Naoshi Izumi, Satsuki Tanaka, Kazunori Ichimaru, Takehiro Morita

研究成果: ジャーナルへの寄稿記事

19 引用 (Scopus)

抄録

A basic study on oil-film formation in reciprocating pure rolling point contact was conducted by optical interferometry observation and numerical analysis. In the analysis the program code published by Venner and Lubrecht was extended for time dependent and starved problems. The observations showed that the oil-film thickness in reciprocating rolling was less than that in unidirectional rolling; this because of the starved condition that was induced by cavitation generated in the previous passing of the contacting region and which survived in the inlet region for a while after reversal. The Elrod algorithm was used in the numerical analysis, and the amount of oil on the trailing edge of the calculation domain was stored and used on the leading edge of the calculation domain when it returned after reversal. In this calculation model, the oil-film thickness decreased with cycle repetition, while in the fully flooded condition the oil-film almost recovered when the contacting area returned to the stroke center, and nearly the same oil-film thickness trajectory was traced along with changes of the entrainment velocity.

元の言語英語
ページ(範囲)565-572
ページ数8
ジャーナルTribology Series
43
出版物ステータス出版済み - 1 1 2003

Fingerprint

Point contacts
Computer simulation
Film thickness
Numerical analysis
Cavitation
Interferometry
Oils
Trajectories

All Science Journal Classification (ASJC) codes

  • Engineering(all)

これを引用

Observation and numerical simulation of oil-film formation under reciprocating rolling point contact. / Izumi, Naoshi; Tanaka, Satsuki; Ichimaru, Kazunori; Morita, Takehiro.

:: Tribology Series, 巻 43, 01.01.2003, p. 565-572.

研究成果: ジャーナルへの寄稿記事

Izumi, Naoshi ; Tanaka, Satsuki ; Ichimaru, Kazunori ; Morita, Takehiro. / Observation and numerical simulation of oil-film formation under reciprocating rolling point contact. :: Tribology Series. 2003 ; 巻 43. pp. 565-572.
@article{75dd15d6bed24100b4f257a8f1e584dc,
title = "Observation and numerical simulation of oil-film formation under reciprocating rolling point contact",
abstract = "A basic study on oil-film formation in reciprocating pure rolling point contact was conducted by optical interferometry observation and numerical analysis. In the analysis the program code published by Venner and Lubrecht was extended for time dependent and starved problems. The observations showed that the oil-film thickness in reciprocating rolling was less than that in unidirectional rolling; this because of the starved condition that was induced by cavitation generated in the previous passing of the contacting region and which survived in the inlet region for a while after reversal. The Elrod algorithm was used in the numerical analysis, and the amount of oil on the trailing edge of the calculation domain was stored and used on the leading edge of the calculation domain when it returned after reversal. In this calculation model, the oil-film thickness decreased with cycle repetition, while in the fully flooded condition the oil-film almost recovered when the contacting area returned to the stroke center, and nearly the same oil-film thickness trajectory was traced along with changes of the entrainment velocity.",
author = "Naoshi Izumi and Satsuki Tanaka and Kazunori Ichimaru and Takehiro Morita",
year = "2003",
month = "1",
day = "1",
language = "English",
volume = "43",
pages = "565--572",
journal = "Tribology Series",
issn = "0167-8922",
publisher = "Elsevier",

}

TY - JOUR

T1 - Observation and numerical simulation of oil-film formation under reciprocating rolling point contact

AU - Izumi, Naoshi

AU - Tanaka, Satsuki

AU - Ichimaru, Kazunori

AU - Morita, Takehiro

PY - 2003/1/1

Y1 - 2003/1/1

N2 - A basic study on oil-film formation in reciprocating pure rolling point contact was conducted by optical interferometry observation and numerical analysis. In the analysis the program code published by Venner and Lubrecht was extended for time dependent and starved problems. The observations showed that the oil-film thickness in reciprocating rolling was less than that in unidirectional rolling; this because of the starved condition that was induced by cavitation generated in the previous passing of the contacting region and which survived in the inlet region for a while after reversal. The Elrod algorithm was used in the numerical analysis, and the amount of oil on the trailing edge of the calculation domain was stored and used on the leading edge of the calculation domain when it returned after reversal. In this calculation model, the oil-film thickness decreased with cycle repetition, while in the fully flooded condition the oil-film almost recovered when the contacting area returned to the stroke center, and nearly the same oil-film thickness trajectory was traced along with changes of the entrainment velocity.

AB - A basic study on oil-film formation in reciprocating pure rolling point contact was conducted by optical interferometry observation and numerical analysis. In the analysis the program code published by Venner and Lubrecht was extended for time dependent and starved problems. The observations showed that the oil-film thickness in reciprocating rolling was less than that in unidirectional rolling; this because of the starved condition that was induced by cavitation generated in the previous passing of the contacting region and which survived in the inlet region for a while after reversal. The Elrod algorithm was used in the numerical analysis, and the amount of oil on the trailing edge of the calculation domain was stored and used on the leading edge of the calculation domain when it returned after reversal. In this calculation model, the oil-film thickness decreased with cycle repetition, while in the fully flooded condition the oil-film almost recovered when the contacting area returned to the stroke center, and nearly the same oil-film thickness trajectory was traced along with changes of the entrainment velocity.

UR - http://www.scopus.com/inward/record.url?scp=17644370722&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=17644370722&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:17644370722

VL - 43

SP - 565

EP - 572

JO - Tribology Series

JF - Tribology Series

SN - 0167-8922

ER -