On-line Control of Feed-Speed in Routing

Chiaki Tanaka, Grzegorz Cyra, Tetsuya Nakao, Masahiro Yoshinobu, Hiroyuki Katayama

研究成果: ジャーナルへの寄稿学術誌査読

7 被引用数 (Scopus)

抄録

An automatic workpiece feed-rate control system has been developed to produce a desired surface roughness in routing in this study. A sensing techique of acoustic emission (AE) signals was applied to monitor the machining process continuously. For the sensing of AE signals, a non-contact technique using a microphone was tried in place of the contact technique with a transducer generally-used. Adaptive control takes place in the system developed for routing by using the linear regressions of the AE count rate on the workpiece feed-rate and the regressions of surface roughnesses on the workpiece feed-rate. The desired surface roughness is produced by the automatic control of the workpiece feed-rate, using AE signals, as the sensing technique.

本文言語英語
ページ(範囲)544-550
ページ数7
ジャーナルMokuzai Gakkaishi/Journal of the Japan Wood Research Society
43
7
出版ステータス出版済み - 1997
外部発表はい

!!!All Science Journal Classification (ASJC) codes

  • 化学工学(全般)

フィンガープリント

「On-line Control of Feed-Speed in Routing」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル