An on-line scheme to fault detection in adaptive control systems is proposed by introducing Kullback Discrimination Information (KDI) as a detection index. When a physical parameter change due to a failure has occurred in a system under adaptive control, the failure effect will hardly be visible in the output performance because of the adaptation mechanism. Such a parameter change is also difficult to detect by monitoring the regulator parameters, which are determined by a recursive identification based on the direct approach. Since the failure effect is reflected as a change in the predictor model used for the adaptive control design, the fault detection leads to a model discrimination problem. It has been shown that the KDI can be used as an effective distortion measure for the model discrimination and the index can be applied in a modified form to detect a fault on-line. Simulation studies on a second order damped oscillatory system have been carried out to demonstrate the efficiency of the method.
|出版ステータス||出版済み - 1989|
All Science Journal Classification (ASJC) codes