Operator-based Nonlinear Modeling and Control for Microreactor

Kosuke Nishizawa, Mingcong Deng, Yuichi Noge

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

抄録

In this paper, a model of a microreactor unit using Peltier devices for cooling and design a control system is proposed. In detail, after describing the mathematical model of the microreactor in consideration of nonlinearity, a control system based on operator theory is designed using the proposed model. Next, the simulation results in the open-loop are shown, and the past model and the proposed model are compared. Finally, we show the simulation results of the proposed control system and confirm its effectiveness.

本文言語英語
ホスト出版物のタイトル2020 IEEE International Conference on Networking, Sensing and Control, ICNSC 2020
出版社Institute of Electrical and Electronics Engineers Inc.
ISBN(電子版)9781728168531
DOI
出版ステータス出版済み - 10 30 2020
外部発表はい
イベント2020 IEEE International Conference on Networking, Sensing and Control, ICNSC 2020 - Nanjing, 中国
継続期間: 10 30 202011 2 2020

出版物シリーズ

名前2020 IEEE International Conference on Networking, Sensing and Control, ICNSC 2020

会議

会議2020 IEEE International Conference on Networking, Sensing and Control, ICNSC 2020
Country中国
CityNanjing
Period10/30/2011/2/20

All Science Journal Classification (ASJC) codes

  • Artificial Intelligence
  • Computer Networks and Communications
  • Statistics, Probability and Uncertainty
  • Control and Optimization
  • Sensory Systems

フィンガープリント 「Operator-based Nonlinear Modeling and Control for Microreactor」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル